Traxxas E Maxx Battery Hold Downs (2)

This is the Replacement Battery Hold Down Set for the Traxxas E-Maxx Truck.
These hold downs screw directly into the chassis.

FEATURES:
Black nylon construction
Adhesive backed foam strips
Posts to accomodate either flat packs or side-by-side packs.

INCLUDES:
2 battery pack hold downs
2 140mm adhesive foam strips
Four 12x45mm adhesive foam strips
6 10x45mm adhesive foam strips
Four 3mm hold down posts
2 3mm shoulder screws
Four clips

REQUIRES:
Assembly onto chassis

SPECS:
Length of Battery Hold Downs: 158mm
Length of Hold Down Posts: 22mm
Length of Shoulder Screws: 20.5mm

COMMENTS:
If flat packs are being used, the two shoulder screws can be used
    (one on each hold down) with the battery hold downs inverted so
    that the hold down can just be swung out of the method to remove the
    pack after the other end has actually been unclipped. If side-by-side packs
    used, then all four posts with clip holes have to be set up
    so that the hold downs can be completely gotten rid of in order to take
    take out the packs.