Traxxas Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube needed)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to connect in reverse
Textured surface area for easy gripping
Compatible with high-current 12-gauge wire
Secure, favorable locking spring crammed terminals for consistent
    contact
Numerous locking barbs keep terminals protect

CONSISTS OF:
One black female plastic port
One black male plastic port
2 sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

This is a wonderful enhancement to the thing currently being discussed.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programming capability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for use in nearly every environment (not intended for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes many stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery port of modeler's choice

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

Get this thing to boost the one you read about.



This is the Sidewinder SCT ESC and 3800kV Motor Combination from Castle Creations.

FEATURES:
Ideal for 2WD or 4WD short course racing or yard slamming
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Developer Automobile Card
    (CSEM6300) needed, not consisted of)
Proportional brake with reverse lockout
Water resistant*

CONSISTS OF:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Instructions

REQUIRES:
Battery port of modeler's choice

SPECS:
ESC
Input Voltage: Maximum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery port
    Motor:
Pole Count: 4
Stator Lamination Thickness: 0.0078" .2mm
Bearings: CNC ranked Japanese bearings
Dimensions: 1.4 x 2.1" (36 x 53mm)
Shaft Diameter: 1/8" (3.2mm)

REMARKS:
*Not intended for operation while immersed in liquid. If system is
    run in wet conditions, rinse with fresh water to remove dirt
    or corrosives, then totally dry unit.
Maximum advised automobile weight is 6.5lbs (2.95kg)