Traxxas LaTrax Alias Quad RTF 2.4GHz

This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Fly
Latrax Alias Quad-Rotor Helicopter.

FEATURES:
Flight System: Auto-Leveling 6 axis control that snaps the Alias
    back to level battle when controls on transmitter are launched
Flight Modes: Three, Easy Mode offers full Auto-Leveling, and limited
    flight angles to keep speed reduced for beginners
    Fast Mode, Car leveling still operates, but speed is increased
    and aerobatic maneuvers can be performed at the press of a button
    Specialist Mode disables Car Leveling for full manual control
Radio: 2.4GHz, shaped like a video game controller, with thumb pads
    set up on gimbals for beginners, for standard pilots, sticks
    are provided and can be quickly set up, system also has telemetry
    made it possible for battery fuel gauge and push-button aerobatics
Frame: Molded composite that stands up to effects
Drivetrain: Top mounted, with raised rotors to avoid tangles
    when landing in lawn
Lights: High-intensity LED
Battery: 3.7V 20C discharge rating, 650mAh LiPo
Battery Battery charger: USB powered, with 1000mA high, 500mA low charge
    rate
Motors: Four high-output brushed coreless motors
Rotors: Dyno-tuned to offer optimal thrust and efficiency
Body: Two-piece molded plastic
Colorful and interchangeable rotor blades, LED lenses, and canopies

INCLUDES:
Latrax Alias Quad-Rotor Helicopter, with Motors, 3.7V LiPo Battery,
    USB Battery charger, four AAA Cells for transmitter, 1.5mm Hex Wrench,
    LED Lights, Instruction Manual, Spare Rotor Blades, Extra Hardware
    and Thumb Sticks

SPECIFICATIONS:
Blade Circle: 14.78" (375.30mm)
Rotor Size: 5.51" (140mm)
Rotor Center Distance Diagonal: 9.25" (235mm)
Rotor Center Distance Vertical: 6.54" (166.20mm)
Width: 12.07" (306.50mm)
General Height: 1.69" (42.90mm)
Ground Clearance: 0.47" (11.90mm)
General Flight Weight (with Battery): 3.53 oz (100g)
Gear Ratio: 11:78

This thing is regularly purchased with the above mentioned thing.

650Mah 3.7V 1-Cell 20C Lipo

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter.

FEATURES:
1ST shrink wrapped cell

INCLUDES:
3.7V 650mAh 1ST LiPo battery

SPECIFICATIONS:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Density: 0.23" (6mm)

REMARKS:
Accused of the Traxxas USB Battery charger, TRAE2638

This thing is regularly purchased with the above mentioned thing.



This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR SC4.18 Short Course Truck from Dromida.

FEATURES:
Chassis: Plastic tub style
Drive: Four wheel, shaft driven
Motor: M370 extremely high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and double rates, and
    2-in-1 water resistant ESC/receiver, water resistant guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Battery charger: Air Conditioning wall type
Suspension: Totally adjustable independent
Shocks: Oil-filled big bore composite body, with several mounting
    areas
Bumpers: Flexible plastic, mud flaps on rear bumper
Ball Bearings: Full set
Body: Printed and cut
Tires and Wheels: Rubber tires with low triangular shaped tread,
    plastic wheels, silver in color, width: 0.92" (23.5mm), outer
    size: 2.2" (56mm), hex size: 0.31" (8mm)
Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when viewed from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind car

INCLUDES:
RTR SC4.18 SC Truck with 2.4GHz Radio, Brushed Motor, Printed Body
    four AA Batteries, 7.2V Battery, Air Conditioning Wall Battery charger, Instructions

SPECIFICATIONS:
Automobile;
Length: 11.4" (290mm)
Width: 7.5" (190mm)
Height: 4.1" (105mm)
Gear Ratio: 9.5:1
    Body;
Length: 11.1" (283mm)
Width: 7.7" (195mm) at rear wheels, widest point
5.9" (149mm) behind front wheels, narrowest point
Height: 3" (76mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581

For increased speed Dromida offers a Brushless Conversion Kit
    (DIDC1150) that consists of a Brushless Motor, 25A ESC and other
    upgraded elements. The Dromida 2S 7.4V 1600mAh Battery
    (DIDC1134) is recommended for finest results and highest speed with
    this conversion set.
**Do NOT use LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will damage the LiPo battery.