Traxxas LaTrax Alias Quad RTF 2.4GHz

This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Fly
Latrax Alias Quad-Rotor Helicopter.

FEATURES:
Flight System: Auto-Leveling 6 axis control that snaps the Alias
    back to level battle when controls on transmitter are launched
Flight Modes: Three, Easy Mode provides full Auto-Leveling, and minimal
    flight angles to keep speed minimized for novices
    Fast Mode, Automobile leveling still works, however speed is increased
    and aerobatic maneuvers can be carried out at the press of a button
    Professional Mode disables Automobile Leveling for full manual control
Radio: 2.4GHz, shaped like a video game controller, with thumb pads
    installed on gimbals for novices, for standard pilots, sticks
    are supplied and can be easily installed, system likewise has telemetry
    made it possible for battery fuel gauge and push-button aerobatics
Frame: Molded composite that stands up to impacts
Drivetrain: Top mounted, with raised rotors to avoid tangles
    when landing in grass
Lights: High-intensity LED
Battery: 3.7V 20C discharge rating, 650mAh LiPo
Battery Battery charger: USB powered, with 1000mA high, 500mA low charge
    rate
Motors: 4 high-output brushed coreless motors
Rotors: Dyno-tuned to provide maximum thrust and efficiency
Body: Two-piece molded plastic
Colorful and interchangeable rotor blades, LED lenses, and canopies

CONSISTS OF:
Latrax Alias Quad-Rotor Helicopter, with Motors, 3.7V LiPo Battery,
    USB Battery charger, four AAA Cells for transmitter, 1.5mm Hex Wrench,
    LED Lights, Instruction Manual, Spare Rotor Blades, Additional Hardware
    and Thumb Sticks

SPECS:
Blade Circle: 14.78" (375.30mm)
Rotor Size: 5.51" (140mm)
Rotor Center Range Diagonal: 9.25" (235mm)
Rotor Hub Range Vertical: 6.54" (166.20mm)
Width: 12.07" (306.50mm)
Total Height: 1.69" (42.90mm)
Ground Clearance: 0.47" (11.90mm)
Total Flight Weight (with Battery): 3.53 oz (100g)
Gear Ratio: 11:78

This product is frequently gotten with the above pointed out product.

650Mah 3.7V 1-Cell 20C Lipo

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter.

FEATURES:
1S diminish covered cell

CONSISTS OF:
3.7V 650mAh 1S LiPo battery

SPECS:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Thickness: 0.23" (6mm)

REMARKS:
Accused of the Traxxas USB Battery charger, TRAE2638

This product is frequently gotten with the above pointed out product.



This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR SC4.18 Brief Course Truck from Dromida.

FEATURES:
Chassis: Plastic tub style
Drive: 4 wheel, shaft driven
Motor: M370 incredibly high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and double rates, and
    2-in-1 waterproof ESC/receiver, waterproof guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Battery charger: Air Conditioner wall type
Suspension: Completely adjustable independent
Shocks: Oil-filled huge bore composite body, with multiple installing
    areas
Bumpers: Versatile plastic, mud flaps on rear bumper
Ball Bearings: Complete set
Body: Printed and trimmed
Tires and Wheels: Rubber tires with low triangular shaped tread,
    plastic wheels, silver in color, width: 0.92" (23.5mm), outer
    size: 2.2" (56mm), hex size: 0.31" (8mm)
Caster: Non-adjustable, caster/toe-in describes the angle of the
    front suspension when viewed from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind car

CONSISTS OF:
RTR SC4.18 SC Truck with 2.4GHz Radio, Brushed Motor, Printed Body
    four AA Batteries, 7.2V Battery, Air Conditioner Wall Battery charger, Instructions

SPECS:
Vehicle;
Length: 11.4" (290mm)
Width: 7.5" (190mm)
Height: 4.1" (105mm)
Gear Ratio: 9.5:1
    Body;
Length: 11.1" (283mm)
Width: 7.7" (195mm) at rear wheels, widest point
5.9" (149mm) behind front wheels, narrowest point
Height: 3" (76mm)

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Back Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Back Uprights 2 DTXC1581

For increased speed Dromida provides a Brushless Conversion Set
    (DIDC1150) that includes a Brushless Motor, 25A ESC and other
    updated elements. The Dromida 2S 7.4V 1600mAh Battery
    (DIDC1134) is advised for best outcomes and highest speed with
    this conversion set.
**Do NOT utilize LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will harm the LiPo battery.