Traxxas LaTrax Alias Quad RTF 2.4GHz

This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Fly
Latrax Alias Quad-Rotor Helicopter.

FEATURES:
Flight System: Auto-Leveling 6 axis control that snaps the Alias
    back to level fight when controls on transmitter are released
Flight Modes: Three, Easy Mode provides full Auto-Leveling, and restricted
    flight angles to keep speed lowered for newbies
    Quick Mode, Automobile leveling still operates, however speed is increased
    and aerobatic maneuvers can be carried out at the press of a button
    Professional Mode disables Automobile Leveling for full manual control
Radio: 2.4GHz, formed like a computer game controller, with thumb pads
    installed on gimbals for newbies, for standard pilots, sticks
    are supplied and can be easily installed, system likewise has telemetry
    enabled battery fuel gauge and push-button aerobatics
Frame: Molded composite that endures impacts
Drivetrain: Top installed, with elevated rotors to avoid tangles
    when landing in grass
Lights: High-intensity LED
Battery: 3.7V 20C discharge score, 650mAh LiPo
Battery Battery charger: USB powered, with 1000mA high, 500mA low charge
    rate
Motors: Four high-output brushed coreless motors
Rotors: Dyno-tuned to offer optimal thrust and efficiency
Body: Two-piece molded plastic
Vibrant and interchangeable rotor blades, LED lenses, and canopies

CONSISTS OF:
Latrax Alias Quad-Rotor Helicopter, with Motors, 3.7V LiPo Battery,
    USB Battery charger, four AAA Cells for transmitter, 1.5mm Hex Wrench,
    LED Lights, Instruction Manual, Spare Rotor Blades, Bonus Hardware
    and Thumb Sticks

SPECIFICATIONS:
Blade Circle: 14.78" (375.30mm)
Rotor Size: 5.51" (140mm)
Rotor Center Distance Diagonal: 9.25" (235mm)
Rotor Center Distance Vertical: 6.54" (166.20mm)
Width: 12.07" (306.50mm)
Total Height: 1.69" (42.90mm)
Ground Clearance: 0.47" (11.90mm)
Total Flight Weight (with Battery): 3.53 oz (100g)
Gear Ratio: 11:78

This product is regularly purchased with the above stated product.

650Mah 3.7V 1-Cell 20C Lipo

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter.

FEATURES:
1ST shrink covered cell

CONSISTS OF:
3.7V 650mAh 1ST LiPo battery

SPECIFICATIONS:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Density: 0.23" (6mm)

COMMENTS:
Accused of the Traxxas USB Battery charger, TRAE2638

This product is regularly purchased with the above stated product.



This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR SC4.18 Short Course Truck from Dromida.

FEATURES:
Chassis: Plastic tub style
Drive: Four wheel, shaft driven
Motor: M370 extremely high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and double rates, and
    2-in-1 waterproof ESC/receiver, waterproof guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Battery charger: Air Conditioning wall type
Suspension: Totally adjustable independent
Shocks: Oil-filled big bore composite body, with numerous installing
    areas
Bumpers: Flexible plastic, mud flaps on rear bumper
Ball Bearings: Full set
Body: Printed and cut
Tires and Wheels: Rubber tires with low triangular shaped tread,
    plastic wheels, silver in color, width: 0.92" (23.5mm), external
    diameter: 2.2" (56mm), hex size: 0.31" (8mm)
Caster: Non-adjustable, caster/toe-in describes the angle of the
    front suspension when seen from the side of the car in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind car

CONSISTS OF:
RTR SC4.18 SC Truck with 2.4GHz Radio, Brushed Motor, Printed Body
    four AA Batteries, 7.2V Battery, Air Conditioning Wall Battery charger, Guidelines

SPECIFICATIONS:
Car;
Length: 11.4" (290mm)
Width: 7.5" (190mm)
Height: 4.1" (105mm)
Gear Ratio: 9.5:1
    Body;
Length: 11.1" (283mm)
Width: 7.7" (195mm) at rear wheels, best point
5.9" (149mm) behind front wheels, narrowest point
Height: 3" (76mm)

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Back Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Back Uprights 2 DTXC1581

For increased speed Dromida provides a Brushless Conversion Package
    (DIDC1150) that consists of a Brushless Motor, 25A ESC and other
    updated elements. The Dromida 2S 7.4V 1600mAh Battery
    (DIDC1134) is recommended for finest outcomes and greatest speed with
    this conversion set.
**Do NOT use LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will harm the LiPo battery.