Traxxas LaTrax Alias Quad RTF 2.4GHz

This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Fly
Latrax Alias Quad-Rotor Helicopter.

FEATURES:
Flight System: Auto-Leveling 6 axis control that snaps the Alias
    back to level battle when controls on transmitter are released
Flight Modes: Three, Easy Mode offers full Auto-Leveling, and limited
    flight angles to keep speed lowered for novices
    Quick Mode, Auto leveling still operates, but speed is increased
    and aerobatic maneuvers can be performed at journalism of a button
    Specialist Mode disables Auto Leveling for full manual control
Radio: 2.4GHz, shaped like a video game controller, with thumb pads
    set up on gimbals for novices, for traditional pilots, sticks
    are supplied and can be easily set up, system also has telemetry
    enabled battery fuel gauge and push-button aerobatics
Frame: Molded composite that endures effects
Drivetrain: Top mounted, with elevated rotors to prevent tangles
    when landing in grass
Lights: High-intensity LED
Battery: 3.7V 20C discharge score, 650mAh LiPo
Battery Charger: USB powered, with 1000mA high, 500mA low charge
    rate
Motors: 4 high-output brushed coreless motors
Rotors: Dyno-tuned to provide optimal thrust and efficiency
Body: Two-piece molded plastic
Vibrant and interchangeable rotor blades, LED lenses, and canopies

INCLUDES:
Latrax Alias Quad-Rotor Helicopter, with Motors, 3.7V LiPo Battery,
    USB Charger, 4 AAA Cells for transmitter, 1.5mm Hex Wrench,
    LED Lights, Instruction Manual, Spare Rotor Blades, Additional Hardware
    and Thumb Sticks

SPECS:
Blade Circle: 14.78" (375.30mm)
Rotor Diameter: 5.51" (140mm)
Rotor Center Distance Diagonal: 9.25" (235mm)
Rotor Hub Distance Vertical: 6.54" (166.20mm)
Width: 12.07" (306.50mm)
Overall Height: 1.69" (42.90mm)
Ground Clearance: 0.47" (11.90mm)
Overall Flight Weight (with Battery): 3.53 oz (100g)
Gear Ratio: 11:78

This thing is regularly acquired with the above mentioned thing.

650Mah 3.7V 1-Cell 20C Lipo

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter.

FEATURES:
1S shrink wrapped cell

INCLUDES:
3.7V 650mAh 1S LiPo battery

SPECS:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Thickness: 0.23" (6mm)

REMARKS:
Charge with the Traxxas USB Charger, TRAE2638

This thing is regularly acquired with the above mentioned thing.



This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR SC4.18 Short Course Truck from Dromida.

FEATURES:
Chassis: Plastic tub style
Drive: 4 wheel, shaft driven
Motor: M370 extremely high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and double rates, and
    2-in-1 waterproof ESC/receiver, waterproof guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Charger: AC wall type
Suspension: Fully adjustable independent
Shocks: Oil-filled big bore composite body, with several installing
    areas
Bumpers: Flexible plastic, mud flaps on rear bumper
Ball Bearings: Full set
Body: Printed and trimmed
Tires and Wheels: Rubber tires with low triangular shaped tread,
    plastic wheels, silver in color, width: 0.92" (23.5mm), outer
    diameter: 2.2" (56mm), hex size: 0.31" (8mm)
Caster: Non-adjustable, caster/toe-in refers to the angle of the
    front suspension when seen from the side of the vehicle in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind vehicle

INCLUDES:
RTR SC4.18 SC Truck with 2.4GHz Radio, Brushed Motor, Printed Body
    4 AA Batteries, 7.2V Battery, AC Wall Charger, Guidelines

SPECS:
Car;
Length: 11.4" (290mm)
Width: 7.5" (190mm)
Height: 4.1" (105mm)
Gear Ratio: 9.5:1
    Body;
Length: 11.1" (283mm)
Width: 7.7" (195mm) at rear wheels, widest point
5.9" (149mm) behind front wheels, narrowest point
Height: 3" (76mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581

For increased speed Dromida offers a Brushless Conversion Set
    (DIDC1150) that includes a Brushless Motor, 25A ESC and other
    updated components. The Dromida 2S 7.4V 1600mAh Battery
    (DIDC1134) is suggested for finest results and highest speed with
    this conversion package.
**Do NOT use LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will damage the LiPo battery.