Traxxas LaTrax Alias Quad RTF 2.4GHz

This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Fly
Latrax Alias Quad-Rotor Helicopter.

FEATURES:
Flight System: Auto-Leveling six axis control that snaps the Alias
    back to level battle when controls on transmitter are launched
Flight Modes: 3, Easy Mode offers full Auto-Leveling, and limited
    flight angles to keep speed minimized for novices
    Quick Mode, Car leveling still works, but speed is increased
    and aerobatic maneuvers can be carried out at the press of a button
    Expert Mode disables Car Leveling for full manual control
Radio: 2.4GHz, shaped like a computer game controller, with thumb pads
    set up on gimbals for novices, for standard pilots, sticks
    are provided and can be easily set up, system likewise has telemetry
    enabled battery fuel gauge and push-button aerobatics
Frame: Molded composite that holds up against impacts
Drivetrain: Top mounted, with raised rotors to avoid tangles
    when landing in grass
Lights: High-intensity LED
Battery: 3.7V 20C discharge score, 650mAh LiPo
Battery Charger: USB powered, with 1000mA high, 500mA low charge
    rate
Motors: Four high-output brushed coreless motors
Rotors: Dyno-tuned to offer maximum thrust and efficiency
Body: Two-piece molded plastic
Vibrant and interchangeable rotor blades, LED lenses, and canopies

INCLUDES:
Latrax Alias Quad-Rotor Helicopter, with Motors, 3.7V LiPo Battery,
    USB Charger, four AAA Cells for transmitter, 1.5mm Hex Wrench,
    LED Lights, User's manual, Spare Rotor Blades, Additional Hardware
    and Thumb Sticks

SPECIFICATIONS:
Blade Circle: 14.78" (375.30mm)
Rotor Size: 5.51" (140mm)
Rotor Center Distance Diagonal: 9.25" (235mm)
Rotor Hub Distance Vertical: 6.54" (166.20mm)
Width: 12.07" (306.50mm)
Total Height: 1.69" (42.90mm)
Ground Clearance: 0.47" (11.90mm)
Total Flight Weight (with Battery): 3.53 oz (100g)
Gear Ratio: 11:78

This thing is often purchased with the above stated thing.

650Mah 3.7V 1-Cell 20C Lipo

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter.

FEATURES:
ONE shrink covered cell

INCLUDES:
3.7V 650mAh ONE LiPo battery

SPECIFICATIONS:
Length: 2.08" (53mm)
Width: 1.18" (30mm)
Thickness: 0.23" (6mm)

REMARKS:
Charge with the Traxxas USB Charger, TRAE2638

This thing is often purchased with the above stated thing.



This is the Electric Powered, Radio Controlled, 1/18 Scale
RTR SC4.18 Brief Course Truck from Dromida.

FEATURES:
Chassis: Plastic tub design
Drive: Four wheel, shaft driven
Motor: M370 extremely high-speed brushed
Radio: 2-channel 2.4GHz radio system with trims and double rates, and
    2-in-1 waterproof ESC/receiver, waterproof guiding servo
Battery: 7.2V 1300mAh NiMH
Battery Charger: AC wall type
Suspension: Fully adjustable independent
Shocks: Oil-filled huge bore composite body, with numerous installing
    areas
Bumpers: Flexible plastic, mud flaps on rear bumper
Ball Bearings: Complete set
Body: Printed and trimmed
Tires and Wheels: Rubber tires with low triangular shaped tread,
    plastic wheels, silver in color, width: 0.92" (23.5mm), external
    diameter: 2.2" (56mm), hex size: 0.31" (8mm)
Caster: Non-adjustable, caster/toe-in describes the angle of the
    front suspension when viewed from the side of the automobile in
    relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind vehicle

INCLUDES:
RTR SC4.18 SC Truck with 2.4GHz Radio, Brushed Motor, Printed Body
    four AA Batteries, 7.2V Battery, AC Wall Charger, Instructions

SPECIFICATIONS:
Vehicle;
Length: 11.4" (290mm)
Width: 7.5" (190mm)
Height: 4.1" (105mm)
Gear Ratio: 9.5:1
    Body;
Length: 11.1" (283mm)
Width: 7.7" (195mm) at rear wheels, widest point
5.9" (149mm) behind front wheels, narrowest point
Height: 3" (76mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 8x12mm Fr Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581

For increased speed Dromida offers a Brushless Conversion Set
    (DIDC1150) that consists of a Brushless Motor, 25A ESC and other
    updated components. The Dromida 2S 7.4V 1600mAh Battery
    (DIDC1134) is suggested for finest outcomes and highest speed with
    this conversion set.
**Do NOT utilize LiPo battery with stock ESC. The stock ESC does not have
    Low Voltage Cutoff, and will damage the LiPo battery.