Traxxas Large Servo Saver

This is a large servo saver that can be used in Traxxas vehicles or any car that
requires a large style servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that permit you to install the saver
on many popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also consisted of is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the steering linkages.

Right here is a excellent product that many others have bought at the very same time.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

This product praises the above discussed product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the main item right here.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
One left and right steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

This product praises the main item right here.



The SW0231MG is a spending plan friendly water resistant digital servo with great torque for numerous applications. This brushed servo features a speed of .17 and 208.0 oz-in of torque 6.0V. It integrates leading edge innovation with very high 12-bit (4096) resolution and metal equipments for your greater accuracy when evading puddles. This is a fantastic upgrade if your aiming to drive your RC vehicle in any condition...rain, sleet, or snow.

Functions:

• Combines cutting edge
  innovation with very high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Extremely strong metal equipments ensure long-life and durability.
• Our servos are totally green ? from materials to production, these servos are ecologically friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Rating: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This product praises the above discussed product.



This is a pack of four 1.5V AA Alkaline Batteries from Duratrax.

FEATURES:
Ideal for RC and home applications
Mercury, cadmium, and lead complimentary

CONSISTS OF:
4 1.5V Onyx AA Alkaline Batteries

The listed below product additionally sets truly well with the product being discussed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Safeguards the Chassis.

FEATURES:
Long lasting Plastic Building and construction
Black in Color

CONSISTS OF:
One Bumper
One Group RPM Decal

NEEDS:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162