Traxxas U-Joints, Driveshaft Revo

These are the Drive Shaft Joints for the Traxxas Revo.

FEATURES:
Steel universal joint set

INCLUDES:
4 Steel Universal blocks
4 Steel Universal pins
Two black steel set pins
4 steel hinge pins
4 steel bearing pins
Eight 1.4mm e-clips

REQUIRES:
Installing on Traxxas Revo

Below is an additional product that compliments the product being reviewed.

Yokes Diff/Tranny

These are the Diff and Trans Drive Yokes for the Traxxas T-Maxx 3.3. TRAC78**

FEATURES:
Black plastic construction

INCLUDES:
Two drive yokes
Two 4x15mm Yoke pins

REQUIRES:
T-Maxx 3.3

SPECS:
Length: 15/16" (23mm)
Diameter: 3/4" (17mm)

Want an additional great product to enhance the above pointed out product?

Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FEATURES:
Completely put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot guards telescoping areas from dirt
Connects to the differential with one screw pin
Functions on the front or rear, right or left of automobile

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Instruction sheet

REQUIRES:
Installing on chassis

This product compliments the main item below.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for usage on the E-Revo

FEATURES:
Stainless Steel bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 6x13x5mm ball bearings Part #5180

SPECS:
Inside size: 6mm (0.24")
Outdoors size: 13mm (0.51")
Width: 5mm (0.20")

This product compliments the above reviewed product.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

INCLUDES:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Instruction sheet

REQUIRES:
Two bundles had to complete truck

Lots of others have purchased this product together with the product that you are currently reviewing.

Center Half Shafts E-Revo

This is the Center Half Shaft Set for the Traxxas E-Revo

FEATURES:
Plastic construction, black in color

INCLUDES:
Center half shafts (three internal splined and two external splined)

REQUIRES:
Setup on the automobile

SPECS:
Diameter: 17.2mm (0.68")

Get this product to enhance the one you read around.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Construction
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

REQUIRES:
Assembly onto Car

SPECS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Within the Wheel Centers, the Truck Needs
4 Total of these Bearings.

This is a amazing enhancement to the product currently being reviewed.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
usage on the Traxxas Revo series.

FEATURES:
Nylon Construction
Black in Color
Allows for Oversized Bearing use

INCLUDES:
One Left Axle Carrier
One Right Axle Carrier
4 Dust Boot Retainers
Two Bearing Spacers

REQUIRES:
Setup