Traxxas Jato 3.3 Nitro 1/10 Stadium Truck W/ 2.4Ghz And Tsm

This is the 2.4GHz radio managed, radiance powered, 1/10 scale, Ready-To-Run
Traxxas Jato 3.3 Stadium Truck with Bluetooth Connection
and Traxxas Stability Management.
**Does not include Docking Base**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms run
    on high-speed electronic components to manage wheel spin and
    steering instructions on loose dirt, concrete as well as ice and snow.
    TSM can be fine tuned or turned off by changing the multi-function
    knob on the TQi transmitter or the slider in the Traxxas Link app.
Chassis: 1.16" (3mm) thick 6061 T6 aluminum, Blue-anodized, fully
    countersunk with buggy style mud guards, and choice of
    receiver pack placement-between the engine and fuel tank
    or in the rear compartment
Drive Type: 2 wheel with Universal joint axles with dust boots
    operate at the most extreme deflection angles to permit the most
    suspension travel
Engine: Traxxas .20 cu in (3.3cc) racing engine w/Slide Valve Carb,
    12mm diameter IPS crankshaft, foam air filter, Blue anodized
    aluminum tuned pipe, additional radiance plug, EZ-Start push-button
    electrical starter with battery and 2A DC peak spotting charger,
    60% more peak horsepower than the TRX 2.5 engine
Radio: Traxxas TQi 2.4GHz high output with Traxxas Link automatic
    design acknowledgment, Bluetooth connectivity, 5 channel receiver with
    telemetry ports, factory set up RPM, speed, temperature, voltage
    and telemetry sensors, failsafe and cordless module is included
    and enables design to be tuned from an iPhone 3G/3GS/4/FOUR, or
    iPod Touch 2nd/3rd/4th generation (Traxxas Link App must be
    be downloaded if wishing to utilize an iPhone or iPod Touch).
    Instinctive, high definition visual user interface including
    Real-Time Telemetry, Customizable Dashboards, Steering/Throttle
    Exposition, Steering/Braking Double Rate, Servo Reversing, Endpoint
    Adjustment, Profile Modification and Sharing
    **Docking Base not included**
Shocks: Four oil filled accuracy GTR Revo-style with threaded
    composite shock bodies
Wheels: 2.85" (72.4) diameter 1.89" (48mm) wide Chrome finish
Ball Bearings: Full set, rubber sealed
Tires: Pre-glued Anaconda with horizontal bead design 3.93"
    (100mm) diameter, 2.8" (71mm) wide
Body: Pre-painted Lexan racing truck style with decals used,
readily available in Black with 4 striping color design depending upon
radio channel choice, see REMARKS
Transmission: Sealed Revo-style silicone filled, with sturdy slipper
clutch constructed of semi-metallic friction product and finned
aluminum alloy pressure plates, spur equipments can be removed and
replaced without changing slipper adjustment
Brake: Semi-metallic brake disc with steel pads get rid of fade caused
    by heat buildup
Transmission: Internal, adjustable 2-speed with Torque Control
    slipper clutch
Gear Differential: Sealed, limited slip, fully tunable with silicone
    shock oils
Steering: Angled steering bellcranks for no bump guide
Clutch: 2-shoe
Suspension: Fully adjustable including roll centers, anti-squat
    and rear toe, flight height and weight predisposition also features 30° caster
    blocks with 25° option and caught, hardened-steel hingepins and
    caught double sheer rod ends
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the cars and truck in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when seen from front or behind vehicle
Fuel Tank: Low profile 2.5oz (75cc) flip top

CONSISTS OF:
One pre-built Jato 3.3 truck, pre-painted Lexan body, owner's handbook,
    registration card, EZ Start handheld system with battery and 2A
    charger, TSM, additional air filter and oil, tool set, wheelie bar, DVD
    operator's guide, 2-channel TQi 2.4GHz radio with Bluetooth
    Connection, antenna tube and mount, additional radiance plug, tools and
    fuel bottle

NEEDS:
Fuel: Car blend with 10-20% nitro material
Batteries: 8 AA 4 for transmitter and 4 for receiver
Building and field equipment

SPECIFICATIONS:
Automobile-
Length: 16.53" (420mm)
Width: 12.87" (327mm) at front wheels
Height: 5.70" (145mm)
Wheelbase: Long, 11.22" (285) Short, 11.14" (283mm)
Tread-Front: 10.6" (270mm)
Back: 10.6" (270mm) wheels on-center side-to-side
Track-Front: 12.87" (327mm)
Back: 13" (330mm)
Weight: 4.72pound (75.6oz) RTR, without fuel
Front and Rear Tires: 3.93" (100mm) diameter
Wheels: 2.85" (72.4mm) diameter
Overall Gear Reduction: 11.73:1 (1st), 8.75:1 (Second)

REMARKS:
Available in the following body colors;
    Blue, TRAD04BB Red/Yellow, TRAD04RY
    Red, TRAD04RR Yellow, TRAD04YY

For replacement bearings order:
    Qty. Size Location Qty Bearing Set
4 5x11mm F.wheels 2 DTXC1553
2 5x11mm R.wheels 1 DTXC1553
2 10x15mm R.wheels 1 DTXC1595
5 5x11mm Transmission 3 DTXC1553
3 10x15mm Transmission 2 DTXC1595
*Optional 4 4x7mm Steering 2 DTXC1507
*Optional 2 5x8mm Brake Bellcrank 1 DTXC1523