Traxxas Input Shaft/ Drive Gear Assemb

This is the replacement Input Shaft/Drive Gear Assembly for the
Traxxas 3905 E-Maxx Truck.

FEATURES:
Steel shaft, black in color
Steel drive gear assembly, silver in color

INCLUDES:
One Input Shaft with 18 Tooth Top Gear

REQUIRES:
Installation following the design manual

SPECS:
Shaft Size: 5mm
Shaft Length: 3.53" (90mm)
Thread Size: 4mm

Get this thing to improve the one you are reading around.

Output Shaft, Transmission

This is the Transmission Output Shaft for the Traxxas E-Maxx.

FUNCTIONS:
Metal construction, black in color

INCLUDES:
One transmission output shaft, Part #5369

REQUIRES:
Installation on the Traxxas E-Maxx

SPECS:
Total length: 2.75" (70mm)
Size of drive dog install: .39" (10mm)
Size of shaft: .23" (6mm)

Here is a terrific thing that several others have purchased the exact same time.

Output Gear, 33 T W/ Spacers (

This is the Output Gear 33T for the Traxxas E-Maxx Truck.

FEATURES:
Black nylon construction

INCLUDES:
One 33T output gear
2 spacers

REQUIRES:
Silicone Grease, use TRAC6037

SPECS:
Outer diameter: 1.37" (35mm)
Thickness: 1.02" (26mm)

This thing is often acquired with the above stated thing.

Gearbox Halves, Shift Detent B

These are the replacement Gearbox Halves for the Traxxas E-Maxx Truck.

FEATURES:
Black plastic construction

INCLUDES:
Gearbox halves (front and back) and screws

REQUIRES:
Remainder of the gearbox contents

SPECS:
Length: 2.67 (68mm) (at largest point)
Width: 3.42" (87mm) (at largest point)

Numerous others have acquired this thing in addition to the thing that you are presently reviewing.

Idler Gear, 20-Tooth/ Idler Ge

This is the replacement 20 Tooth Idler Gear and Shaft for the
Traxxas E-Maxx 4WD RTR.

FEATURES:
Steel construction, gun metal in color
Changes a used or damaged idler gear and shaft

INCLUDES:
One 20 Tooth Idler Gear
One 5x18mm Idler Gear Shaft

REQUIRES:
Installation following the design manual

SPECS:
Outdoors Size: .86" (22mm)
Inside Size: .43" (11mm)
Thickness: .50" (12.5mm)

Here is a terrific thing that several others have purchased the exact same time.

Motor Plate For Single Motor

This is the optional Single Motor Plate for the
Traxxas E-Maxx 16.8V RTR.

FEATURES:
Aluminum construction, blue in color
Created for a clean install of a single brushless motor system in
the E-Maxx 16.8V RTR (requires gear cover number TRAC3997)

INCLUDES:
One Aluminum Motor Plate

REQUIRES:
Installation and motor cover number TRAC3997

You will certainly like this thing if you have the thing above mentioned.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the above gone over thing.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel construction
Blue rubber dirt guards

INCLUDES:
(2) ball bearings, Part #5117

SPECS:
Inside diameter: 6mm
Outdoors diameter: 12mm
Width: 4mm

COMMENTS:
This bearing set is utilized in the transmission and differentials of
    the Revo.