Traxxas Idler Gear, 20-Tooth/ Idler Ge

This is the replacement 20 Tooth Idler Gear and Shaft for the
Traxxas E-Maxx 4WD RTR.

FEATURES:
Steel building and construction, weapon metal in color
Replaces a used or broken idler equipment and shaft

CONSISTS OF:
One 20 Tooth Idler Gear
One 5x18mm Idler Gear Shaft

REQUIRES:
Installation following the model manual

SPECIFICATIONS:
Outside Size: .86" (22mm)
Inside Size: .43" (11mm)
Density: .50" (12.5mm)

Below is an additional item that praises the item being gone over.

Gearbox Halves, Shift Detent B

These are the replacement Gearbox Halves for the Traxxas E-Maxx Truck.

FEATURES:
Black plastic building and construction

CONSISTS OF:
Gearbox halves (front and rear) and screws

REQUIRES:
Rest of the gearbox contents

SPECIFICATIONS:
Length: 2.67 (68mm) (at best point)
Width: 3.42" (87mm) (at best point)

This item is often acquired with the above discussed item.

Input Shaft/ Drive Gear Assemb

This is the replacement Input Shaft/Drive Gear Assembly for the
Traxxas 3905 E-Maxx Truck.

FEATURES:
Steel shaft, black in color
Steel drive equipment assembly, silver in color

CONSISTS OF:
One Input Shaft with 18 Tooth Top Gear

REQUIRES:
Installation following the model manual

SPECIFICATIONS:
Shaft Size: 5mm
Shaft Length: 3.53" (90mm)
Thread Size: 4mm

This item praises the main item below.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly enjoy this thing if you have the thing earlier mentioned.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Outside diameter: 12mm
Width: 4mm

REMARKS:
This bearing set is used in the transmission and differentials of
    the Revo.

The listed below item likewise pairs really well with the item being gone over.

Output Shaft, Transmission

This is the Transmission Output Shaft for the Traxxas E-Maxx.

FEATURES:
Metal building and construction, black in color

CONSISTS OF:
One transmission output shaft, Part #5369

REQUIRES:
Installation on the Traxxas E-Maxx

SPECIFICATIONS:
Overall length: 2.75" (70mm)
Size of drive pet mount: .39" (10mm)
Size of shaft: .23" (6mm)

The listed below item likewise pairs really well with the item being gone over.

Output Gear, 33 T W/ Spacers (

This is the Output Gear 33T for the Traxxas E-Maxx Truck.

FEATURES:
Black nylon building and construction

CONSISTS OF:
One 33T output equipment
2 spacers

REQUIRES:
Silicone Grease, use TRAC6037

SPECIFICATIONS:
Outer diameter: 1.37" (35mm)
Density: 1.02" (26mm)