Traxxas Housings, Differential, Rear

This is the Rear Differential Real estate for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building
Black in color

INCLUDES:
Two rear differential housing halves

REQUIRES:
Installation around diff elements

Want an additional wonderful product to match the above stated product?

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

REQUIRES:
Assembly onto Vehicle

SPECS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Inside of the Wheel Centers, the Truck Requires
Four Overall of these Bearings.

Below is an additional product that compliments the product being gone over.

Housings, Differential, Front

This is the Front Differential Real estate for the Traxxas Slash 4x4.

FUNCTIONS:
Hardened plastic building
Black in color

INCLUDES:
Two front differential housing halves

REQUIRES:
Installation around assembled differential elements

You will certainly enjoy this product if you have the product above pointed out.

Alum Bearing Adapter Slash 4X4

This is an optional Bearing Adapter for the Slash 4X4.

FUNCTIONS:
6061-T6 anodized blue aluminum building
Steel 10x15x4mm ball bearing with blue rubber seal
Used on slipper shaft

INCLUDES:
One aluminum adapter
One 10x15x4mm ball bearing

REQUIRES:
Installation on to slipper shaft
Staying clutch pieces

This product compliments the above gone over product.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

INCLUDES:
Two 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Vehicle

SPECS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

Want an additional wonderful product to match the above stated product?

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to car

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).

Numerous others have acquired this product together with the product that you are presently reading about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise available in Blue (RPMC0705)

Below is an additional product that compliments the product being gone over.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Provider/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Provider
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

INCLUDES:
One Diff Provider
Two Blue Rubber Shaft Gaskets
One Black Rubber Diff Provider Gaskets
One Gray Washer

REQUIRES:
Assembly to car