Traxxas Housings, Differential, Front

This is the Front Differential Housing for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic construction
Black in color

INCLUDES:
Two front differential real estate halves

NEEDS:
Setup around assembled differential components

Lots of others have actually gotten this item together with the item that you are presently checking out.

Housings, Differential, Rear

This is the Back Differential Housing for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic construction
Black in color

INCLUDES:
Two rear differential real estate halves

NEEDS:
Setup around diff components

Lots of others have actually gotten this item together with the item that you are presently checking out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is a wonderful item that many others have actually bought at the very same time.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Construction
Blue Rubber Sealed

INCLUDES:
Two 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Vehicle

SPECIFICATIONS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Density: 5mm (0.19")

This item praises the main item here.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

NEEDS:
Assembly to vehicle

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Primary Clutch (one required).

This item praises the main item here.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Durable steel construction
Silver in color

INCLUDES:
4 51.5mm pins
4 30mm pins

NEEDS:
Setup on the Slash 4x4

This is a superb enhancement to the item presently being gone over.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Compatible with the LGC chassis only**
**will not deal with the conventional chassis variation of the Slash 4x4.**

FEATURES:
Two-piece design allows front end of vehicle to be eliminated without
    needing to get rid of the bellcranks
Side dirt guards mix with the chassis and help secure the
    steering servo and bellcrank location from dirt
Constructed of engineering grade nylons, black in color

INCLUDES:
Two-Piece Front Bulkhead with Mounting Hardware and Direction Sheet

This item praises the above gone over item.

Drive Hub, Frt, Hardened Steel (1) Screw Pin, (1) Fits Slash

This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4.

FEATURES:
Hardened steel construction

INCLUDES:
One Drive Hub
One Screw Pin

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Length: 19mm (0.75")
Size: 12mm (0.47")

This item praises the main item here.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

NEEDS:
Setting up in vehicle

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not supplied