Traxxas Housings, Differential, Front

This is the Front Differential Real estate for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building and construction
Black in color

INCLUDES:
2 front differential housing halves

NEEDS:
Setup around put together differential elements

Many others have gotten this thing along with the thing that you are presently checking out.

Housings, Differential, Rear

This is the Rear Differential Real estate for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building and construction
Black in color

INCLUDES:
2 rear differential housing halves

NEEDS:
Setup around diff elements

Many others have gotten this thing along with the thing that you are presently checking out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is a great thing that lots of others have purchased the same time.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Construction
Blue Rubber Sealed

INCLUDES:
2 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Car

SPECIFICATIONS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Density: 5mm (0.19")

This thing praises the main item right here.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to automobile

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one required).

This thing praises the main item right here.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Long lasting steel building and construction
Silver in color

INCLUDES:
Four 51.5mm pins
Four 30mm pins

NEEDS:
Setup on the Slash 4x4

This is a wonderful addition to the thing presently being talked about.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Suitable with the LGC chassis just**
**will not deal with the conventional chassis variation of the Slash 4x4.**

FEATURES:
Two-piece design enables front end of automobile to be removed without
    needing to remove the bellcranks
Side dirt shields mix with the chassis and help protect the
    steering servo and bellcrank location from dirt
Constructed of engineering grade nylons, black in color

INCLUDES:
Two-Piece Front Bulkhead with Installing Hardware and Guideline Sheet

This thing praises the above talked about thing.

Drive Hub, Frt, Hardened Steel (1) Screw Pin, (1) Fits Slash

This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4.

FEATURES:
Solidified steel building and construction

INCLUDES:
One Drive Hub
One Screw Pin

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Length: 19mm (0.75")
Size: 12mm (0.47")

This thing praises the main item right here.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with connectors

NEEDS:
Installing in automobile

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not offered