Traxxas Housings, Differential, Front

This is the Front Differential Housing for the Traxxas Slash 4x4.

FUNCTIONS:
Solidified plastic building
Black in color

CONSISTS OF:
Two front differential real estate halves

NEEDS:
Setup around assembled differential components

Several others have actually bought this product in addition to the product that you are currently checking out.

Housings, Differential, Rear

This is the Rear Differential Housing for the Traxxas Slash 4x4.

FUNCTIONS:
Solidified plastic building
Black in color

CONSISTS OF:
Two rear differential real estate halves

NEEDS:
Setup around diff components

Several others have actually bought this product in addition to the product that you are currently checking out.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is a great product that several others have actually bought at the exact same time.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

CONSISTS OF:
Two 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Automobile

SPECS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Density: 5mm (0.19")

This product praises the main item here.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to vehicle

SPECS:
Inner Size: 10mm
Outer Size: 15mm
Side Density: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one needed).

This product praises the main item here.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel building
Silver in color

CONSISTS OF:
Four 51.5mm pins
Four 30mm pins

NEEDS:
Setup on the Slash 4x4

This is a fantastic enhancement to the product currently being gone over.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Compatible with the LGC chassis just**
**will not work with the basic chassis version of the Slash 4x4.**

FUNCTIONS:
Two-piece design allows front end of vehicle to be removed without
    having to remove the bellcranks
Side dirt guards blend with the chassis and aid protect the
    steering servo and bellcrank area from dirt
Constructed of engineering grade nylons, black in color

CONSISTS OF:
Two-Piece Front Bulkhead with Mounting Hardware and Direction Sheet

This product praises the above gone over product.

Drive Hub, Frt, Hardened Steel (1) Screw Pin, (1) Fits Slash

This is the Front Hardened Steel Drive Hub for usage on the Traxxas Slash 4x4.

FUNCTIONS:
Solidified steel building

CONSISTS OF:
One Drive Hub
One Screw Pin

NEEDS:
Setup on the vehicle

SPECS:
Length: 19mm (0.75")
Size: 12mm (0.47")

This product praises the main item here.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

CONSISTS OF:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

NEEDS:
Setting up in vehicle

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not supplied