Traxxas Hold Down, Tall Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash.
**Will not deal with the Traxxas Slash 4x4.**

FEATURES:
Black nylon building

CONSISTS OF:
One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Angled Body Clip

REQUIRES:
Installation on the chassis

This is a amazing addition to the thing currently being discussed.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale car applications
Prewired with Traxxas high existing port

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 11.1V
Ranked Capacity: 5000mAh
Release Rating: 25C constant
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER put on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

Want an additional terrific thing to enhance the above pointed out thing?



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Star Plug.

FEATURES:
Ideal for 1/10 scale car applications
Prewired with Star Plug
Star plug is compatible with the R/C market's most typically utilized
    polarized power plug, tapered shape and grip strips for quick and
    simple connection and separation

CONSISTS OF:
11.1V 5000mAh 25C Soft Case LiPo Battery with Star Plug

REQUIRES:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 11.1V
Ranked Capacity: 5000mAh
Release Rating: 25C constant
Measurements: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: Star Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER put on flammable products or leave ignored throughout
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm