Traxxas High Current Id Connector Adapter, Female To Molex Male

This is the Traxxas Female Connector to Molex Male Connector Adapter.

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to link backwards
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Protect, favorable locking spring loaded terminals for consistent
    contact
Numerous locking barbs keep terminals secure

CONSISTS OF:
One Traxxas female adapter to Molex male connector adapter

COMMENTS:
Molex adapter not ideal for high existing usage

Many others have actually bought this product along with the product that you are currently checking out.

Slash 4X4 Body

This is the Brief Course Racing Truck Clear Body
for the Traxxas 4x4 Slash and Slayer.

FEATURES:
Trimmed and all set to paint
Clear protective finish on outside of body

CONSISTS OF:
Clear Brief Course Racing Truck Body with Window Masks, Sponsor and
    Body Trim Decals

REQUIRES:
Spray or brush-on polycarbonate safe paint

SPECS:
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

Get this product to improve the one you read about.

Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System

This is the AC Powered Traxxas EZ-Peak 100W Dual Battery Charger
with iD Car Battery Identification.

FEATURES:
Charges 2S and 3S LiPo batteries
5-8 cell NiMH batteries
Traxxas's iD technology immediately sets up and enhances charge
    settings for Traxxas iD equipped batteries
Charges two batteries simultaneously at approximately 50W (4 amps) each, or
    charges single battery at 100W (8 amp) output in High-Output
    mode
Charges a NiMH and LiPo at the exact same time
Advanced Mode for full manual control of charger settings
Development bar and audible informs
Storage Mode prepares LiPo batteries for prolonged storage
One Month minimal guarantee through Traxxas beginning at date of
    purchase

CONSISTS OF:
Traxxas EZ-Peak 100W Dual Battery Charger with AC Power Cable,
    Guidelines, Cooling Fan

SPECS:
Input Power: 100-240V/50-60Hz
Output: 100W max
Charge Current: 1-4A (double mode), 5-8A (high output mode)
Discharge Current Range: 500mA
Current Drain for Balance Ports: 500mA
Weight: 20.3oz (575g)
Measurements: 7 x 5.4 x 2.2" (176 x 138 x 57mm)