Traxxas High Current Id Connector Adapter, Female To Molex Male

This is the Traxxas Female Connector to Molex Male Connector Adapter.

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide surface area, gold-plated terminals
Reverse polarity security makes it impossible to link backwards
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Protect, favorable locking spring loaded terminals for constant
    contact
Multiple locking barbs keep terminals secure

CONSISTS OF:
One Traxxas female adapter to Molex male connector adapter

REMARKS:
Molex adapter not suitable for high present use

Several others have gotten this item along with the item that you are currently reading about.

Slash 4X4 Body

This is the Brief Course Racing Truck Clear Body
for the Traxxas 4x4 Slash and Slayer.

FEATURES:
Cut and all set to paint
Clear protective finishing on outside of body

CONSISTS OF:
Clear Brief Course Racing Truck Body with Window Masks, Sponsor and
    Body Trim Decals

REQUIRES:
Spray or brush-on polycarbonate safe paint

SPECIFICATIONS:
Length: 21.25" (540mm)
Width: 11.5" (292mm)
Height: 5.5" (140mm)

Get this item to boost the one you read about.

Ez-Peak Plus Plus 100 Watt Nimh/Lipo Dual Charger W/ Id System

This is the A/C Powered Traxxas EZ-Peak 100W Dual Battery Battery charger
with iD Automobile Battery Identification.

FEATURES:
Charges TWO and 3S LiPo batteries
5-8 cell NiMH batteries
Traxxas's iD technology immediately sets up and enhances charge
    settings for Traxxas iD geared up batteries
Charges two batteries all at once at approximately 50W (4 amps) each, or
    charges single battery at 100W (8 amp) output in High-Output
    mode
Charges a NiMH and LiPo at the very same time
Advanced Mode for full manual control of charger settings
Development bar and audible notifies
Storage Mode prepares LiPo batteries for extended storage
1 Month limited service warranty through Traxxas starting at date of
    purchase

CONSISTS OF:
Traxxas EZ-Peak 100W Dual Battery Battery charger with A/C Power Cord,
    Guidelines, Cooling Fan

SPECIFICATIONS:
Input Power: 100-240V/50-60Hz
Output: 100W max
Charge Current: 1-4A (double mode), 5-8A (high output mode)
Discharge Current Range: 500mA
Present Drain for Balance Ports: 500mA
Weight: 20.3oz (575g)
Dimensions: 7 x 5.4 x 2.2" (176 x 138 x 57mm)