Traxxas Hex Wheel Hub 2.5 X 12Mm Rustler / Stampede / Slash

This is a Hex Wheel Hub Set for the Traxxas Rustler and
Stampede. These parts have more offset than
the stock hex wheel hub set (TRAC6044).

FEATURES:
Gray plastic building

INCLUDES:
Two wheel centers
Two 2.5mmX12mm axle pins

SPECS:
Hex size: 12mm
Width: .32" (8mm)

Below is a wonderful thing that lots of others have actually bought at the very same time.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Lots of others have actually purchased this thing along with the thing that you are presently reading about.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These are situated in the front steering blocks.

FEATURES:
Steel building
Natural color

INCLUDES:
Two front axles

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Diameter: 5mm

REMARKS:
These will not work for the nitro variations. For that axle, use
    TRAC2536.

This is a fantastic addition to the thing presently being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly enjoy this item if you have the item just above stated.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on car

Below is one more thing that praises the thing being discussed.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

This thing praises the above discussed thing.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

INCLUDES:
One left and best steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

Lots of others have actually purchased this thing along with the thing that you are presently reading about.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building

INCLUDES:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outdoors diameter: 7mm

Below is one more thing that praises the thing being discussed.

Oilite Bushings 5X11mm

This is a replacement bushing set for the TRAXXAS TRX-10 BULLET, HAWK2, and
various other TRAXXAS PACKAGES. .
FEATURES:
Made of metal

INCLUDES:
14 bushings

SPECS:
5x11mm bushings

REMARKS:
These bushings would deal with any car utilizing 5x11mm bushings.

This thing praises the main item here.

Large Servo Saver

This is a big servo saver that can be used in Traxxas vehicles or any automobile that
requires a big style servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that allow you to install the saver
on the majority of popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the guiding linkages.