Traxxas Hex Wheel Hub 2.5 X 12Mm Rustler / Stampede / Slash

This is a Hex Wheel Hub Set for the Traxxas Rustler and
Stampede. These parts have more offset than
the stock hex wheel hub set (TRAC6044).

FUNCTIONS:
Gray plastic building

CONSISTS OF:
Two wheel centers
Two 2.5mmX12mm axle pins

SPECIFICATIONS:
Hex size: 12mm
Width: .32" (8mm)

Here is a wonderful item that lots of others have purchased the same time.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Several others have gotten this item in addition to the item that you are presently checking out.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These are situated in the front steering blocks.

FEATURES:
Steel building
Natural color

CONSISTS OF:
Two front axles

REQUIRES:
Nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Diameter: 5mm

REMARKS:
These will not work for the nitro versions. For that axle, use
    TRAC2536.

This is a great addition to the item presently being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will like this thing if you have the thing previously pointed out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on vehicle

Here is one more item that praises the item being gone over.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Density: 0.5mm

This item praises the above gone over item.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic building
Black in color

CONSISTS OF:
One left and ideal steering blocks

REQUIRES:
5x11x4mm bearings (DTXC1547)

Several others have gotten this item in addition to the item that you are presently checking out.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building

CONSISTS OF:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outdoors diameter: 7mm

Here is one more item that praises the item being gone over.

Oilite Bushings 5X11mm

This is a replacement bushing set for the TRAXXAS TRX-10 BULLET, HAWK2, and
numerous other TRAXXAS SETS. .
FUNCTIONS:
Made from metal

CONSISTS OF:
14 bushings

SPECIFICATIONS:
5x11mm bushings

REMARKS:
These bushings would deal with any vehicle utilizing 5x11mm bushings.

This item praises the main item below.

Large Servo Saver

This is a big servo saver that can be utilized in Traxxas cars or any automobile that
requires a big style servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that permit you to install the saver
on most popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for installing the guiding linkages.