Traxxas Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas cars
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building and construction

CONSISTS OF:
Two hex centers
Four axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These centers could be used with other cars utilizing the very same
    pin/hex design. These centers Will Not deal with the T-Maxx or E-Maxx.

This is a superb enhancement to the product currently being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

The below product also sets truly well with the product being talked about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Assembly to automobile

SPECIFICATIONS:
Inner Size: 10mm
External Size: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Primary Clutch (one needed).

Want one more fantastic product to compliment the above mentioned product?

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a set of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building and construction

CONSISTS OF:
Two Front Driveshafts

This product praises the above talked about product.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building and construction

CONSISTS OF:
Two Rear Driveshafts

Get this product to boost the one you are reading about.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a variety of bodies
    to be used including rally car bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

CONSISTS OF:
Front and Rear Body Installs and Posts with Installing Hardware

Right here is a fantastic product that lots of others have actually bought at the exact same time.



This is a set of Pro-Line Masher M2 2.8" All Terrain Front or Rear Tires
installed to Black Desperado Wheels.

FEATURES:
Fits the back of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electric Stampede and Rustler
front and back of the Stampede 4x4
Chevron design tread for great traction on rough surface
Side tread has a hook design that craters the dirt for excellent
    side traction
M2 (soft) substance
Nylon building and construction six spoke wheel with molded-in beadlock ring

CONSISTS OF:
Two Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECIFICATIONS:
Wheel Size: 2.8" (71mm)
General Size: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm

Right here is a fantastic product that lots of others have actually bought at the exact same time.

Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FUNCTIONS:
4 snap-in adjustment positions to manage degree of wheelie action
    easily removable if additional control isn't needed
Constructed of solidified plastic, black in color

CONSISTS OF:
Wheelie Bar Arm with four Shoulder Screws, TRAC3642

REQUIRES:
Fastening to chassis

REMARKS:
For the 3.3 variation only.
Does not such as Wheels and Axles, order TRAC9576 if needed.