Traxxas Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building and construction

SUCHES AS:
Two hex hubs
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These hubs might be used with other automobiles utilizing the very same
    pin/hex design. These hubs Will Not deal with the T-Maxx or E-Maxx.

This is a wonderful enhancement to the product currently being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

The below product likewise sets actually well with the product being gone over.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

SUCHES AS:
Two Ball Bearings

NEEDS:
Assembly to automobile

SPECS:
Inner Size: 10mm
Outer Size: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one needed).

Want one more great product to compliment the above pointed out product?

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a set of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building and construction

SUCHES AS:
Two Front Driveshafts

This product praises the above gone over product.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Back Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building and construction

SUCHES AS:
Two Back Driveshafts

Get this product to boost the one you are reading around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a variety of bodies
    to be used suching as rally vehicle bodies
Constructed of nylon, black in color
Screw-on body install system eliminates metal clips

SUCHES AS:
Front and Rear Body Installs and Posts with Installing Hardware

Below is a great product that several others have bought at the very same time.



This is a pair of Pro-Line Masher M2 2.8" All Surface Front or Rear Tires
installed to Black Desperado Wheels.

FEATURES:
Fits the rear of the Traxxas Nitro Stampede, JATO, and Nitro Rustler,
front of the electrical Stampede and Rustler
front and rear of the Stampede 4x4
Chevron style tread for good traction on rough terrain
Side tread has a hook design that craters the dirt for outstanding
    side traction
M2 (soft) compound
Nylon building and construction 6 spoke wheel with molded-in beadlock ring

SUCHES AS:
Two Masher M2 2.8" Tires with Foam Inserts and Black Desperado Wheels

SPECS:
Wheel Size: 2.8" (71mm)
General Size: 4.90" (124mm)
Width: 2.8" (71mm)
Hex Size: 12mm

Below is a great product that several others have bought at the very same time.

Wheelie Bar Arm/Connector

This is the Wheelie Bar Arm for the T-Maxx 3.3.

FUNCTIONS:
4 snap-in change positions to control degree of wheelie action
    quickly detachable if added control isn't needed
Constructed of hardened plastic, black in color

SUCHES AS:
Wheelie Bar Arm with four Shoulder Screws, TRAC3642

NEEDS:
Attaching to chassis

COMMENTS:
For the 3.3 version only.
Does not consist of Wheels and Axles, order TRAC9576 if needed.