Traxxas Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want another excellent thing to enhance the above pointed out thing?

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated construction

CONSISTS OF:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outdoors diameter: 7mm

This thing is often acquired with the above pointed out thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

The listed below thing likewise pairs actually well with the thing being gone over.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Density: 0.5mm

This thing compliments the main item right here.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on vehicle

Regularly acquired with the thing that you are presently reading about.

Hex Wheel Hub 2.5 X 12Mm Rustler / Stampede / Slash

This is a Hex Wheel Hub Set for the Traxxas Rustler and
Stampede. These parts have more offset than
the stock hex wheel hub set (TRAC6044).

FEATURES:
Gray plastic construction

CONSISTS OF:
2 wheel hubs
2 2.5mmX12mm axle pins

SPECIFICATIONS:
Hex size: 12mm
Width: .32" (8mm)

This is a superb addition to the thing presently being gone over.

Front Axles (2) (R & S)

This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.
These are located in the front steering blocks.

FEATURES:
Steel construction
Natural color

CONSISTS OF:
2 front axles

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Size: 5mm

COMMENTS:
These will not work for the nitro versions. For that axle, use
    TRAC2536.

Several others have actually acquired this thing together with the thing that you are presently reading about.

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum construction anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
Four 4mm Flanged Nylon Locknuts

NEEDS:
6mm nut motorist

SPECIFICATIONS:
Hole Size: 4mm
Hex Size: 6mm

Here is another thing that compliments the thing being gone over.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and direction
    sheet

NEEDS:
Setup on the vehicle

Regularly acquired with the thing that you are presently reading about.

3 X 15Mm Button Hex Screw (6)

This is a bundle of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Size: 3mm