Traxxas Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want one more wonderful product to enhance the above mentioned product?

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building

CONSISTS OF:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outdoors diameter: 7mm

This product is often acquired with the above mentioned product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

The listed below product also pairs really well with the product being gone over.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

This product praises the main item right here.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on car

Often acquired with the product that you are currently reviewing.

Hex Wheel Hub 2.5 X 12Mm Rustler / Stampede / Slash

This is a Hex Wheel Center Set for the Traxxas Rustler and
Stampede. These parts have more offset than
the stock hex wheel center set (TRAC6044).

FEATURES:
Gray plastic building

CONSISTS OF:
2 wheel centers
2 2.5mmX12mm axle pins

SPECS:
Hex size: 12mm
Width: .32" (8mm)

This is a wonderful enhancement to the product currently being gone over.

Front Axles (2) (R & S)

This is a Set of Stock Replacement Front Axles for the Rustler and Stampede.
These are located in the front steering blocks.

FEATURES:
Steel building
Natural color

CONSISTS OF:
2 front axles

NEEDS:
Nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Diameter: 5mm

REMARKS:
These will not work for the nitro versions. For that axle, use
    TRAC2536.

Several others have actually acquired this product in addition to the product that you are currently reviewing.

4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building anodized blue in color
Serrated on the back for sure grip

CONSISTS OF:
4 4mm Flanged Nylon Locknuts

NEEDS:
6mm nut driver

SPECS:
Hole Diameter: 4mm
Hex Size: 6mm

Right here is one more product that praises the product being gone over.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and guideline
    sheet

NEEDS:
Installation on the car

Often acquired with the product that you are currently reviewing.

3 X 15Mm Button Hex Screw (6)

This is a plan of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel building, Black in color
Used on the Traxxas Revo beast truck, can likewise be used in any
    application where a 3x15mm button head screw is needed

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm