Traxxas Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FUNCTIONS:
Solidified steel building and construction
Fits 0.196" (5mm) size motor shafts
Number of teeth and pitch stamped on gear for easy recognition

INCLUDES:
18T Pinion Gear with Set Screw

SPECS:
Number of Pearly whites: 18
Pitch: 1.0 metric
Pressure Angle: 20°

You will like this thing if you have the thing previously discussed.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
Two electric fans lower motor temperatures as much as 30 degrees
Formed plastic shroud, black in color
One year limited warranty through Castle Creations starting at date
    of purchase

INCLUDES:
Two Fans, Shroud, two Zip Ties and Wire Lead

SPECS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

This item praises the main item here.

Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Car, TRAD42**.

FUNCTIONS:
Formed plastic building and construction
1.0 metric pitch

INCLUDES:
50T Spur Gear for the Traxxas XO-1 On-Road Car

Want another excellent item to enhance the above stated item?

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Kit for the Continuous Velocity Driveshafts
    utilized on the Traxxas X-Maxx Monster Truck, TRAD75**.

FUNCTIONS:
Steel building and construction
Replaces the pins and inserts that links the #7750 consistent
    speed driveshaft to the #7753 stub axle

INCLUDES:
Two each, Pins and Inserts

Right here is another item that praises the item being discussed.

Male Jst Style Connectors (4)

This is a pack of 4 male JST design ports. These are unassembled, and can be utilized to fix a bad JST port lead, or to build your very own JST leads.

ProTek R/C is an AMain.com brand.

You will like this thing if you have the thing previously discussed.



This is the Dual Cooling Fan Y-Harness from Novak.

FEATURES:
Enables two cooling fans equipped with JST plugs to be installed onto
    Novak ESCs for higher cooling capability

INCLUDES:
Dual Cooling Fan Y-Harness from Novak

SPECS:
Overall Length: 3.6" (91mm) not consisting of ports

Regularly acquired with the item that you are presently reading about.



Get the most out of your 1/10 scale vehicle!
Designed for guys who want to press their brushless 1/10 scale cars to the limit, this THREE battery lets you make the most of your power system. Functions a huge capability for extended runtimes, and a 50C rating for great deals of power. Competitively priced, this lipo is a fantastic mix of functions and value.
Specifications

Application(s): 1/10 scale automobiles, trucks, and buggies
Discharge Port: Traxxas-type
Balance Port: JST-XH
Weight: 350 g
Measurements: 133 x 42 x 27 mm

The listed below item additionally pairs really well with the item being discussed.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronic devices
    and extend life of motor or ESC
Thirty day limited warranty starting at date of purchase-valid
    in the United States only

INCLUDES:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Port

SPECS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)