Traxxas Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FUNCTIONS:
Hardened steel building and construction
Fits 0.196" (5mm) diameter motor shafts
Variety of teeth and pitch stamped on gear for simple recognition

INCLUDES:
18T Pinion Gear with Set Screw

SPECIFICATIONS:
Variety of Teeth: 18
Pitch: 1.0 metric
Pressure Angle: 20°

You will enjoy this item if you have the item above mentioned.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
2 electrical fans lower motor temperatures as much as 30 degrees
Molded plastic shroud, black in color
One year restricted guarantee through Castle Creations beginning at date
    of purchase

INCLUDES:
2 Fans, Shroud, two Zip Ties and Wire Lead

SPECIFICATIONS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

This product praises the main item right here.

Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Vehicle, TRAD42**.

FUNCTIONS:
Molded plastic building and construction
1.0 metric pitch

INCLUDES:
50T Spur Gear for the Traxxas XO-1 On-Road Vehicle

Want an additional excellent product to match the above mentioned product?

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Set for the Constant Velocity Driveshafts
    used on the Traxxas X-Maxx Beast Truck, TRAD75**.

FUNCTIONS:
Steel building and construction
Replaces the pins and inserts that links the #7750 continuous
    speed driveshaft to the #7753 stub axle

INCLUDES:
2 each, Pins and Inserts

Here is an additional product that praises the product being gone over.

Male Jst Style Connectors (4)

This is a pack of four male JST design connectors. These are unassembled, and can be used to repair a bad JST adapter lead, or to construct your very own JST leads.

ProTek R/C is an AMain.com brand name.

You will enjoy this item if you have the item above mentioned.



This is the Double Cooling Fan Y-Harness from Novak.

FEATURES:
Enables two cooling fans equipped with JST plugs to be installed onto
    Novak ESCs for higher cooling ability

INCLUDES:
Double Cooling Fan Y-Harness from Novak

SPECIFICATIONS:
Total Length: 3.6" (91mm) not including connectors

Regularly acquired with the product that you are presently reading about.



Get the most out of your 1/10 scale vehicle!
Designed for guys who wish to push their brushless 1/10 scale vehicles to the limit, this THREE battery lets you take full advantage of your power system. Features a big capability for extended runtimes, and a 50C rating for great deals of power. Competitively priced, this lipo is an excellent mix of features and value.
Specifications

Application(s): 1/10 scale vehicles, trucks, and buggies
Release Connector: Traxxas-type
Balance Connector: JST-XH
Weight: 350 g
Dimensions: 133 x 42 x 27 mm

The below product also sets actually well with the product being gone over.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronic devices
    and lengthen life of motor or ESC
Thirty day restricted guarantee beginning at date of purchase-valid
    in the United States only

INCLUDES:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Connector

SPECIFICATIONS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)