Traxxas Gear, 18-T Pinion (1.0 Metric Pitch, 20? Pressure Angle) (Fits 5

This is the optional 18 Tooth Pinion Gear for the Traxxas X-Maxx.

FEATURES:
Hardened steel construction
Fits 0.196" (5mm) size motor shafts
Number of teeth and pitch marked on gear for easy recognition

CONSISTS OF:
18T Pinion Gear with Set Screw

SPECS:
Number of Pearly whites: 18
Pitch: 1.0 metric
Pressure Angle: 20°

You will certainly love this thing if you have the thing above discussed.



This is the Castle Creations Blower for Neu-Castle 20 Series Motors.

FEATURES:
2 electric fans lower motor temperatures as much as 30 degrees
Formed plastic shroud, black in color
One year limited service warranty through Castle Creations beginning at date
    of purchase

CONSISTS OF:
2 Fans, Shroud, 2 Zip Ties and Wire Lead

SPECS:
Length: 3.5" (89mm)
Width: 2.4" (60.5mm)
Height: 2.3" (57.5mm)
Wire Lead Length: 18" (457mm)

This thing compliments the main item right here.

Spur Gear, 50-Tooth (1.0 Metric Pitch)

This is the 50T Spur Gear for the Traxxas XO-1 On-Road Automobile, TRAD42**.

FEATURES:
Formed plastic construction
1.0 metric pitch

CONSISTS OF:
50T Spur Gear for the Traxxas XO-1 On-Road Automobile

Want an additional terrific thing to enhance the above stated thing?

Rebuild Kit, Steel Constant-Velocity Driveshaft (Includes Pins F

This is the Rebuild Set for the Constant Speed Driveshafts
    used on the Traxxas X-Maxx Monster Truck, TRAD75**.

FEATURES:
Steel construction
Changes the pins and inserts that links the #7750 constant
    speed driveshaft to the #7753 stub axle

CONSISTS OF:
2 each, Pins and Inserts

Here is an additional thing that compliments the thing being talked about.

Male Jst Style Connectors (4)

This is a pack of 4 male JST design ports. These are unassembled, and can be used to fix a bad JST adapter lead, or to build your very own JST leads.

ProTek R/C is an AMain.com brand.

You will certainly love this thing if you have the thing above discussed.



This is the Double Cooling Fan Y-Harness from Novak.

FEATURES:
Allows 2 cooling fans geared up with JST plugs to be installed onto
    Novak ESCs for higher cooling ability

CONSISTS OF:
Double Cooling Fan Y-Harness from Novak

SPECS:
Overall Length: 3.6" (91mm) not including ports

Frequently acquired with the thing that you are presently checking out.



Get the most out of your 1/10 scale vehicle!
Designed for guys who want to push their brushless 1/10 scale automobiles to the limitation, this 3S battery lets you maximize your power system. Functions a big capacity for extended runtimes, and a 50C rating for lots of power. Competitively priced, this lipo is a fantastic combination of features and value.
Specifications

Application(s): 1/10 scale automobiles, trucks, and buggies
Release Connector: Traxxas-type
Balance Connector: JST-XH
Weight: 350 g
Dimensions: 133 x 42 x 27 mm

The listed below thing additionally sets truly well with the thing being talked about.

Motor Heat Sink/ESC Cooling Fan 30x30mm

This is the Hot-Racing 30x30mm Motor Heat Sink/ESC Cooling Fan.

FEATURES:
Fastens to heat sink of motor or on top of ESC to cool electronics
    and extend life of motor or ESC
Thirty day limited service warranty beginning at date of purchase-valid
    in the United States only

CONSISTS OF:
30x30mm Motor Heat Sink/ESC Cooling Fan with Wire Lead and 2-pin
    Connector

SPECS:
Length: 1.2" (30mm)
Width: 1.2" (30mm)