Traxxas Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Mounts with Body Post for the Traxxas Revo.

FEATURES:
Black plastic construction
"TRX" logo on front body install

CONSISTS OF:
Front and rear body installs Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

REQUIRES:
Setup on the Traxxas Revo

Several others have purchased this item along with the item that you are currently reviewing.

Body Mount Posts, Front & Rear

These are the Tall Front and Rear Body Mount Posts for usage on the
Traxxas Top Truck

FUNCTIONS:
Nylon construction
Black in color

CONSISTS OF:
Front and Rear Body Mount Posts

REQUIRES:
Setup on the car

The listed below item also pairs truly well with the item being gone over.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Want an additional excellent item to compliment the above mentioned item?

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Back Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic construction
Rocker shafts preinstalled

CONSISTS OF:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Setup on the Traxxas Revo

The listed below item also pairs truly well with the item being gone over.

Center Half Shafts E-Revo

This is the Center Half Shaft Set for the Traxxas E-Revo

FUNCTIONS:
Plastic construction, black in color

CONSISTS OF:
Center half shafts (3 internal splined and two external splined)

REQUIRES:
Setup on the car

SPECS:
Size: 17.2mm (0.68")

Several others have purchased this item along with the item that you are currently reviewing.

Bumper Frnt W/Mount 4 X 10Mm Bcs (2) 3 X 25Mm Bcs (2) Revo

This is the replacement Front Bumper and Bumper Mount for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Nylon Building and construction
Silver Bumper and Black Mount

CONSISTS OF:
One Silver Nylon Front Bumper
One Black Nylon Front Bumper Mount
2 3mm x 25mm Cap Hex Head Device Thread Screws
2 4mm x 10mm Cap Hex Head Device Thread Screws

REQUIRES:
Assembly onto Vehicle
2mm Hex Wrench, GPMR8011
2.5mm Hex Wrench, GPMR8012

This is a wonderful addition to the item currently being gone over.

Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic construction
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

CONSISTS OF:
Front and read skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

REQUIRES:
Setup on the Traxxas Revo

Right here is a excellent item that lots of others have purchased the exact same time.

High Volume Air Filter Assembl

This is the High Volume Air Filter Body
for the Traxxas Revo 3.3.

FUNCTIONS:
Changes damaged or filthy air filter assemblies
Plastic body with foam element and rubber attachment pipe

CONSISTS OF:
Foam filter and pre filter, assistance cap, filter base and wire install

REQUIRES:
Air filter oil, DTXC2465

SPECS:
Total Height: 3.9" (100mm)
Filter Size: 1.6" (41mm)

You will like this thing if you have the thing above mentioned.

Driveshafts, Summit & E-Revo Center E-Revo (Steel Constant-

These are the optional Center Driveshafts for usage on the Traxxas E-Revo.

FUNCTIONS:
Steel construction
Constant-velocity
Inner and outer dust boots

CONSISTS OF:
One Back Center Driveshaft
One Front Center Driveshaft

REQUIRES:
Setup on the car