Traxxas Frnt & Rr Body Mounts Revo

This is the Front and Rear Body Mounts with Body Post for the Traxxas Revo.

FEATURES:
Black plastic building and construction
"TRX" logo design on front body install

INCLUDES:
Front and rear body mounts Part #5314
Front and rear body post Part #5314
(4) 2.5X18mm screw pins
(1) 4X10mm button head screw

REQUIRES:
Setup on the Traxxas Revo

Lots of others have acquired this thing along with the thing that you are currently reading about.

Body Mount Posts, Front & Rear

These are the Tall Front and Rear Body Mount Posts for usage on the
Traxxas Summit Truck

FUNCTIONS:
Nylon building and construction
Black in color

INCLUDES:
Front and Rear Body Mount Posts

REQUIRES:
Setup on the car

The below thing also sets truly well with the thing being discussed.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

INCLUDES:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Want one more terrific thing to enhance the above mentioned thing?

Bulkhead Rr L&R Halves Diff Retainer 4 X 14Mm Bcs (4) Revo

This is the Back Bulkhead for the Traxxas Revo.

FEATURES:
Black plastic building and construction
Rocker shafts preinstalled

INCLUDES:
Rear bulkhead halves Part #5329
(2) rocker shafts Part #5354
(4) 4X14mm button head screws

REQUIRES:
Setup on the Traxxas Revo

The below thing also sets truly well with the thing being discussed.

Center Half Shafts E-Revo

This is the Center Half Shaft Set for the Traxxas E-Revo

FUNCTIONS:
Plastic building and construction, black in color

INCLUDES:
Center half shafts (three internal splined and 2 external splined)

REQUIRES:
Setup on the car

SPECS:
Diameter: 17.2mm (0.68")

Lots of others have acquired this thing along with the thing that you are currently reading about.

Bumper Frnt W/Mount 4 X 10Mm Bcs (2) 3 X 25Mm Bcs (2) Revo

This is the replacement Front Bumper and Bumper Mount for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Nylon Construction
Silver Bumper and Black Mount

INCLUDES:
One Silver Nylon Front Bumper
One Black Nylon Front Bumper Mount
2 3mm x 25mm Cap Hex Head Machine Thread Screws
2 4mm x 10mm Cap Hex Head Machine Thread Screws

REQUIRES:
Assembly onto Automobile
2mm Hex Wrench, GPMR8011
2.5mm Hex Wrench, GPMR8012

This is a fantastic enhancement to the thing currently being discussed.

Skid Plate Set Front & Rear Revo Summit

This is the Front and Rear Skid Plates for the Traxxas Revo.

FEATURES:
Black plastic building and construction
Front skid plate is a two-piece design
Rear skid plate is a one-piece design

INCLUDES:
Front and read skid plates Part #5337
(8) 3X10mm button head screws Part #2577
(1) 3X30mm button head screws Part #2582

REQUIRES:
Setup on the Traxxas Revo

Right here is a terrific thing that several others have purchased the exact same time.

High Volume Air Filter Assembl

This is the High Volume Air Filter Body
for the Traxxas Revo 3.3.

FUNCTIONS:
Replaces broken or dirty air filter assemblies
Plastic body with foam element and rubber attachment tube

INCLUDES:
Foam filter and pre filter, assistance cap, filter base and wire install

REQUIRES:
Air filter oil, DTXC2465

SPECS:
Overall Height: 3.9" (100mm)
Filter Diameter: 1.6" (41mm)

You will enjoy this thing if you have the thing just above pointed out.

Driveshafts, Summit & E-Revo Center E-Revo (Steel Constant-

These are the optional Center Driveshafts for usage on the Traxxas E-Revo.

FUNCTIONS:
Steel building and construction
Constant-velocity
Inner and outer dust boots

INCLUDES:
One Back Center Driveshaft
One Front Center Driveshaft

REQUIRES:
Setup on the car