Traxxas Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Simple installation needs only snapping the fan housing on the
ESC and plugging in the adapter on the ESC to the fan

CONSISTS OF:
One Cooling Fan Device with installation sheet

NEEDS:
Installation following the consisted of directions

SPECS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Lots of others have acquired this thing in addition to the thing that you are currently checking out.

Heat Sink Velineon 380 Motor Brushless, Aluminum Blue-Ano

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor.

FEATURES:
Aluminum building, anodized blue in color

CONSISTS OF:
Aluminum Heat Sink with tube of Thermal Paste and Guidelines

Get this thing to boost the one you are reading about.

Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

Lots of others have acquired this thing in addition to the thing that you are currently checking out.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brands of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

Often acquired with the thing that you are currently checking out.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, coated
Anodized black with white springs
Entirely put together

CONSISTS OF:
4 totally put together shocks with white springs
Installing hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the design

This thing compliments the above discussed thing.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a wide range of bodies
    to be used consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

CONSISTS OF:
Front and Rear Body Mounts and Posts with Installing Hardware

Lots of others have acquired this thing in addition to the thing that you are currently checking out.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

CONSISTS OF:
One 14 tooth Pinion Equipment
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is only one of two which are used on the E-Maxx double motor
    set-up.

You will love this product if you have the product above stated.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

REMARKS:
Likewise available in Blue (RPMC0705)