Traxxas Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic setup needs just snapping the fan real estate on the
ESC and plugging in the port on the ESC to the fan

INCLUDES:
One Cooling Fan Unit with setup sheet

NEEDS:
Setup following the included guidelines

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Numerous others have gotten this product along with the product that you are currently reviewing.

Heat Sink Velineon 380 Motor Brushless, Aluminum Blue-Ano

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor.

FEATURES:
Aluminum building, anodized blue in color

INCLUDES:
Aluminum Heat Sink with tube of Thermal Paste and Instructions

Get this product to enhance the one you are reading around.

Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Bad guy IV.
AXY
4/8/92

Numerous others have gotten this product along with the product that you are currently reviewing.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

INCLUDES:
Twelve body clips

SPECIFICATIONS:
Length: aprrox. 7/8"

Frequently gotten with the product that you are currently reviewing.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, coated
Anodized black with white springs
Completely assembled

INCLUDES:
4 fully assembled shocks with white springs
Installing hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and putting together onto the model

This product praises the above discussed product.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs enable a variety of bodies
    to be used consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body install system eliminates metal clips

INCLUDES:
Front and Rear Body Installs and Posts with Installing Hardware

Numerous others have gotten this product along with the product that you are currently reviewing.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the equipment which is connected straight to the motor.

FEATURES:
Machined Steel
Designed for a 3mm shaft

INCLUDES:
One 14 tooth Pinion Equipment
One 3 x 4mm Set Screw

NEEDS:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This equipment is just one of 2 which are used on the E-Maxx dual motor
    set-up.

You will certainly enjoy this item if you have the item previously pointed out.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Also offered in Blue (RPMC0705)