Traxxas Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic installation requires just snapping the fan housing on the
ESC and plugging in the adapter on the ESC to the fan

CONSISTS OF:
One Cooling Fan System with installation sheet

REQUIRES:
Installation following the included guidelines

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) including clips - .47" (12mm) not including clips

Numerous others have purchased this product along with the product that you are presently reviewing.

Heat Sink Velineon 380 Motor Brushless, Aluminum Blue-Ano

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor.

FEATURES:
Aluminum building and construction, anodized blue in color

CONSISTS OF:
Aluminum Heat Sink with tube of Thermal Paste and Instructions

Get this product to boost the one you read around.

Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Bad guy IV.
AXY
4/8/92

Numerous others have purchased this product along with the product that you are presently reviewing.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be utilized on Traxxas or most other brands of cars.

FEATURES:
Metal clips are silver in color

CONSISTS OF:
Twelve body clips

SPECIFICATIONS:
Length: aprrox. 7/8"

Regularly purchased with the product that you are presently reviewing.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, coated
Anodized black with white springs
Completely assembled

CONSISTS OF:
Four fully assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the design

This product compliments the above reviewed product.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs permit a wide range of bodies
    to be utilized including rally car bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

CONSISTS OF:
Front and Rear Body Installs and Publishes with Mounting Hardware

Numerous others have purchased this product along with the product that you are presently reviewing.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the equipment which is connected directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

CONSISTS OF:
One 14 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This equipment is just one of two which are utilized on the E-Maxx double motor
    set-up.

You will like this product if you have the product earlier mentioned.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Density: 0.31" (8mm)

REMARKS:
Likewise readily available in Blue (RPMC0705)