Traxxas Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Basic installation needs only snapping the fan housing on the
ESC and plugging in the adapter on the ESC to the fan

INCLUDES:
One Cooling Fan System with installation sheet

REQUIRES:
Setup following the included directions

SPECIFICATIONS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Several others have bought this product together with the product that you are currently reading about.

Heat Sink Velineon 380 Motor Brushless, Aluminum Blue-Ano

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor.

FEATURES:
Aluminum building, anodized blue in color

INCLUDES:
Aluminum Heat Sink with tube of Thermal Paste and Directions

Get this product to improve the one you read around.

Motor Heat Sink

This is the original replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

Several others have bought this product together with the product that you are currently reading about.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be used on Traxxas or most other brand names of cars.

FEATURES:
Metal clips are silver in color

INCLUDES:
Twelve body clips

SPECIFICATIONS:
Length: aprrox. 7/8"

Frequently bought with the product that you are currently reading about.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, layered
Anodized black with white springs
Entirely assembled

INCLUDES:
4 totally assembled shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the design

This product praises the above discussed product.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts allow a wide range of bodies
    to be used consisting of rally car bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

INCLUDES:
Front and Rear Body Installs and Publishes with Installing Hardware

Several others have bought this product together with the product that you are currently reading about.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck.
This is the gear which is attached directly to the motor.

FEATURES:
Machined Steel
Created for a 3mm shaft

INCLUDES:
One 14 tooth Pinion Gear
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten set screw.

COMMENTS:
This gear is only one of two which are used on the E-Maxx double motor
    set-up.

You will certainly love this item if you have the item previously pointed out.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Likewise available in Blue (RPMC0705)