Traxxas Esc Cooling Fan "V"

This is the optional Cooling Fan for the Traxxas Velineon
VXL-3 Electronic Speed control.

FEATURES:
Keeps your VXL-3 running cooler
Simple setup requires just snapping the fan real estate on the
ESC and plugging in the port on the ESC to the fan

INCLUDES:
One Cooling Fan Device with setup sheet

REQUIRES:
Installation following the included directions

SPECS:
Length: 1.56" (39mm)
Width: 1.34" (34mm)
Height: .83" (21mm) consisting of clips - .47" (12mm) not consisting of clips

Numerous others have actually purchased this thing in addition to the thing that you are presently reading about.

Heat Sink Velineon 380 Motor Brushless, Aluminum Blue-Ano

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor.

FEATURES:
Aluminum building and construction, anodized blue in color

INCLUDES:
Aluminum Heat Sink with tube of Thermal Paste and Instructions

Get this thing to enhance the one you read about.

Motor Heat Sink

This is the initial replacement motor heatsink for the Traxxas Villain IV.
AXY
4/8/92

Numerous others have actually purchased this thing in addition to the thing that you are presently reading about.

Body Clips (12)

These are Replacement Traxxas Body Clips.
They can be utilized on Traxxas or most other brands of cars.

FEATURES:
Metal clips are silver in color

INCLUDES:
Twelve body clips

SPECS:
Length: aprrox. 7/8"

Frequently purchased with the thing that you are presently reading about.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, layered
Anodized black with white springs
Completely assembled

INCLUDES:
4 completely assembled shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the model

This thing praises the above reviewed thing.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a variety of bodies
    to be utilized consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body install system gets rid of metal clips

INCLUDES:
Front and Rear Body Mounts and Posts with Installing Hardware

Numerous others have actually purchased this thing in addition to the thing that you are presently reading about.

14T Pinion Gear 32P

This is a 14 Tooth 32 Pitch Pinion Equipment for the Traxxas E-Maxx Truck.
This is the gear which is attached straight to the motor.

FEATURES:
Machined Steel
Developed for a 3mm shaft

INCLUDES:
One 14 tooth Pinion Equipment
One 3 x 4mm Set Screw

REQUIRES:
Assembly onto an E-Maxx truck.
1.5mm hex wrench to tighten up set screw.

COMMENTS:
This gear is just one of two which are utilized on the E-Maxx dual motor
    set-up.

You will love this thing if you have the thing previously discussed.

Fr/Re A-Arms Black Slash/Stampede 4X4

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at widest point
Thickness: 0.31" (8mm)

REMARKS:
Also available in Blue (RPMC0705)