Traxxas 3.3 Engine Ips Shaft W/Pull Start

This is the Traxxas TRX 3.3 Racing Engine with Pull Starter.

FEATURES:
For usage in all Traxxas TRX2.5 and TRX 3.3 equipped vehicles
Pull starter can be gotten rid of to install the EZ Start
60% more peak power than the TRX2.5, with nearly 50% more power
    under the curve for strong linear velocity
Round rear exhaust with one-piece IPS crankshaft
Composite body slide valve carburetor with high-volume air filter
Blue anodized aluminum cooling head with molded head protector

CONSISTS OF:
Traxxas TRX 3.3 Racing Engine with Pull Beginner and radiance plug
One guideline manual (TRAZ5300)
One service assistance guide and parts lis.
One set of engine decals
One engine break-in DVD
One little bottle of air filter oil
One air filter

NEEDS:
Automobile fuel with 10%, 20% or 33% nitro material

SPECIFICATIONS:
Displacement: .20 cu in (3.3cc)
Practical RPM: N/A
Output: N/A
Weight: 10.9oz (305g)
Distance in between installing holes exact same side: 0.39" (10mm)
Distance in between installing holes opposite side: 1.2" (32mm)
Distance from center of engine to front bearing: 1.2" (32mm)
Distance/bottom of installing flanges/top of cylinder head: 3.5" (88mm
Width of installing flanges: 44mm

COMMENTS:
Other variations of the TRX 3.3 engine consist of;
    #5404 Single Shaft without Beginner, TRAG5404
    #5406 Multi-Shaft without Beginner, TRAG5406
    #5409 Multi-Shaft w/Recoil Pull Beginner, TRAG5409

Here is an additional product that compliments the product being reviewed.



This is the DuraTrax NiMH 7.2V 3000mAh Onyx Stick Battery Load
with Standard Connector.

FEATURES:
Perfect sport pack for automobiles, trucks and boats

CONSISTS OF:
DuraTrax NiMH 7.2V 3000mAh Onyx Stick Battery with Standard
    Adapter

NEEDS:
NiMH suitable charger such as the Duratrax Onyx series

SPECIFICATIONS:
Capacity: 3000mAh
Number of Cells in Series: 6
Ranked Voltage: 7.2V
Minutes. Release Voltage: 5.4V
Maximum Recommended Charge Current: 4 amps
Release Lead: 14AWG 2.7" (70mm) long wire w/Standard connector
Load Dimensions: 5.2 x 1.9 x 0.9" (131 x 47 x 24mm)
Weight: 13 oz (360 g)
Number of Welds per Connection: 6 area welds
Cell Size: Sub-C

This product compliments the main item below.

Cone Split Beveled

Replacement SPLIT BEVEL CONE for the Traxxas Nitro Vee Boat. This cone is
part of the engine assembly. (Image .12)

BUNDLE
CONSISTS OF:
1-Beveled Cone

FUNCTIONS:
Black steel building and construction
Beveled cone shape with split on one side

COMMENTS:
Beveled cone sits in front of the flywheel
7/19/94sk

Several others have gotten this product in addition to the product that you are currently reviewing.

T Maxx .15 To 2.5 Upgrade Kit

This is the Pro .15 to TRX 2.5 engine conversion set from Traxxas.
It permits you to install the more recent 2.5 engine to an older T-Maxx.

FUNCTIONS:
Tuned pipeline, bellcrank, & throttle servo horn made of plastic
Linkage wire made of steel

CONSISTS OF:
One Plastic Tune Pipe w/Wire Hanger (TRAG5152)
One Exhaust Header w/Screws & O-ring (TRAG5140)
One Exhaust Coupler (TRAG5246)
One Slide Carb Link Bellcrank (TRAC5167)
One Slide Carb Linkage Set (TRAC5168)
One Drill Bit for drilling Bellcrank Post installing holes
2 Tie-Straps for installing Exhaust Coupler
One 90-degree pressure fitting
One 3x10mm maker cap screw w/washer
One guideline sheet
One drilling design template sheet

NEEDS:
2.5 engine stock clutch system and stock engine install

SPECIFICATIONS:
Tune Pipe Length: 101.6mm (4")
Header Pipe Outer Size: 13mm (.51")
Drill Bit size: 3.175mm (.125")

COMMENTS:
If EZ Start system is required, utilize TRAP5271