Traxxas Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel construction

INCLUDES:
Two Rear Driveshafts

Frequently gotten with the item that you are presently reading about.

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a set of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel construction

INCLUDES:
Two Front Driveshafts

The listed below item additionally pairs really well with the item being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

Several others have actually gotten this item along with the item that you are presently reading about.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel construction

INCLUDES:
One Steel Disc
3 Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Guidelines

REQUIRES:
Disassembly of slipper clutch

Get this item to boost the one you are reading about.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum construction

INCLUDES:
Two hex hubs
4 axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These hubs might be utilized with other vehicles using the exact same
    pin/hex design. These hubs Will Not work on the T-Maxx or E-Maxx.

This item is often gotten with the above discussed item.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for much better handling and greater
    cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Guidelines

Several others have actually gotten this item along with the item that you are presently reading about.

Locked Diff Hub Spool For Traxxas Slash, Rustler, Stampede

    This is the Hot-Racing Differential Locker Spindle
for the Traxxas 2WD Bandit, Slash, Electric Rustler and Electric Stampede.

FEATURES:
Stainless-steel output shaft
CNC machined 6061-T6 aluminum locker plate
Installs in differential case to eliminate diff action
Offers much better velocity, climbing, wandering, and wheelie possible
Suggested for off-road use only
Thirty day limited guarantee beginning at date of purchase-valid
    in the United States only

INCLUDES:
Differential Locker Spindle

You will enjoy this item if you have the item earlier mentioned.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

Get this item to boost the one you are reading about.

Anaconda Tirew/All-Star Bk Chrome Elec Rr 1 Left & 1 Righ

This is a set of the Traxxas Rear All Star Wheels
and Anaconda Tires for Electric Vehicles.

FEATURES:
Black chrome plated plastic, 5 spoke design
Split X-Pattern tread tires with foam inserts

INCLUDES:
One left and one right all-star wheel with Anaconda tires and
    foam inserts for electric vehicles

REQUIRES:
Setting up on automobile

SPECS:
Diameter: 3.93" (100mm)
Width: 1.96" (50mm)