Traxxas Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a pair of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building and construction

CONSISTS OF:
Two Rear Driveshafts

Often acquired with the thing that you are currently checking out.

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a pair of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building and construction

CONSISTS OF:
Two Front Driveshafts

The below thing likewise sets actually well with the thing being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Many others have acquired this thing in addition to the thing that you are currently checking out.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Package for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Steel Disc
Three Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Guidelines

REQUIRES:
Disassembly of slipper clutch

Get this thing to improve the one you read about.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building and construction

CONSISTS OF:
Two hex centers
4 axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These centers could be used with other automobiles using the same
    pin/hex design. These centers Will Not work on the T-Maxx or E-Maxx.

This thing is frequently acquired with the above pointed out thing.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Lowers the chassis 1" (25.4mm) for better handling and greater
    cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Guidelines

Many others have acquired this thing in addition to the thing that you are currently checking out.

Locked Diff Hub Spool For Traxxas Slash, Rustler, Stampede

    This is the Hot-Racing Differential Locker Spool
for the Traxxas 2WD Outlaw, Slash, Electric Rustler and Electric Stampede.

FEATURES:
Stainless steel output shaft
CNC machined 6061-T6 aluminum locker plate
Installs in differential case to eliminate diff action
Offers better velocity, climbing up, drifting, and wheelie potential
Suggested for off-road usage just
Thirty day restricted guarantee starting at date of purchase-valid
    in the United States just

CONSISTS OF:
Differential Locker Spool

You will like this item if you have the item previously pointed out.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

Get this thing to improve the one you read about.

Anaconda Tirew/All-Star Bk Chrome Elec Rr 1 Left & 1 Righ

This is a pair of the Traxxas Rear All Star Wheels
and Anaconda Tires for Electric Vehicles.

FEATURES:
Black chrome plated plastic, five spoke design
Split X-Pattern tread tires with foam inserts

CONSISTS OF:
One left and one right all-star wheel with Anaconda tires and
    foam inserts for electrical automobiles

REQUIRES:
Setting up on car

SPECS:
Size: 3.93" (100mm)
Width: 1.96" (50mm)