Traxxas Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building

INCLUDES:
Two Rear Driveshafts

Frequently gotten with the product that you are currently checking out.

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a set of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building

INCLUDES:
Two Front Driveshafts

The below product also pairs actually well with the product being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Many others have actually gotten this product in addition to the product that you are currently checking out.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building

INCLUDES:
One Steel Disc
Three Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

REQUIRES:
Disassembly of slipper clutch

Get this product to enhance the one you read about.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

INCLUDES:
Two hex hubs
Four axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These hubs might be utilized with other automobiles using the very same
    pin/hex design. These hubs Will Not work on the T-Maxx or E-Maxx.

This product is frequently gotten with the above mentioned product.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Lowers the chassis 1" (25.4mm) for better handling and greater
    cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Instructions

Many others have actually gotten this product in addition to the product that you are currently checking out.

Locked Diff Hub Spool For Traxxas Slash, Rustler, Stampede

    This is the Hot-Racing Differential Locker Spool
for the Traxxas 2WD Outlaw, Slash, Electric Rustler and Electric Stampede.

FEATURES:
Stainless-steel output shaft
CNC machined 6061-T6 aluminum locker plate
Installs in differential case to remove diff action
Provides better acceleration, climbing up, drifting, and wheelie potential
Suggested for off-road usage just
Thirty day minimal warranty beginning at date of purchase-valid
    in the United States just

INCLUDES:
Differential Locker Spool

You will certainly enjoy this item if you have the item earlier pointed out.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECIFICATIONS:
Size: 5x8mm
Density: 0.5mm

Get this product to enhance the one you read about.

Anaconda Tirew/All-Star Bk Chrome Elec Rr 1 Left & 1 Righ

This is a set of the Traxxas Rear All Star Wheels
and Anaconda Tires for Electric Vehicles.

FEATURES:
Black chrome plated plastic, five spoke design
Split X-Pattern tread tires with foam inserts

INCLUDES:
One left and one right all-star wheel with Anaconda tires and
    foam inserts for electric automobiles

REQUIRES:
Setting up on car

SPECIFICATIONS:
Diameter: 3.93" (100mm)
Width: 1.96" (50mm)