Traxxas Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building and construction

CONSISTS OF:
Two Rear Driveshafts

Frequently acquired with the thing that you are presently checking out.

Driveshafts, Front, Steel-Spline Constant Velocity (Complete Ass

This is a set of optional Front Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building and construction

CONSISTS OF:
Two Front Driveshafts

The listed below thing likewise sets actually well with the thing being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Numerous others have acquired this thing together with the thing that you are presently checking out.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Steel Disc
Three Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

NEEDS:
Disassembly of slipper clutch

Get this thing to improve the one you read around.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building and construction

CONSISTS OF:
Two hex centers
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

COMMENTS:
These centers might be used with other vehicles making use of the exact same
    pin/hex design. These centers Will Not work on the T-Maxx or E-Maxx.

This thing is regularly acquired with the above stated thing.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Kit for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Reduces the chassis 1" (25.4mm) for much better handling and greater
    cornering speed
Holds battery and electronic devices as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Instructions

Numerous others have acquired this thing together with the thing that you are presently checking out.

Locked Diff Hub Spool For Traxxas Slash, Rustler, Stampede

    This is the Hot-Racing Differential Locker Spool
for the Traxxas 2WD Outlaw, Slash, Electric Rustler and Electric Stampede.

FEATURES:
Stainless-steel output shaft
CNC machined 6061-T6 aluminum locker plate
Installs in differential case to eliminate diff action
Provides much better velocity, climbing up, drifting, and wheelie potential
Advised for off-road use just
Thirty day restricted warranty beginning at date of purchase-valid
    in the United States just

CONSISTS OF:
Differential Locker Spool

You will certainly enjoy this product if you have the product previously discussed.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Density: 0.5mm

Get this thing to improve the one you read around.

Anaconda Tirew/All-Star Bk Chrome Elec Rr 1 Left & 1 Righ

This is a set of the Traxxas Rear All Star Wheels
and Anaconda Tires for Electric Vehicles.

FEATURES:
Black chrome plated plastic, 5 spoke design
Split X-Pattern tread tires with foam inserts

CONSISTS OF:
One left and one right all-star wheel with Anaconda tires and
    foam inserts for electric vehicles

NEEDS:
Setting up on car

SPECS:
Diameter: 3.93" (100mm)
Width: 1.96" (50mm)