Traxxas Driveshaft Assembly (1)

This is the Driveshaft Assembly for the Traxxas Revo 3.3.
and the T-Maxx 3.3.

FUNCTIONS:
Completely put together
Plastic telescoping driveshaft with steel universals
Blue rubber boot shields telescoping sections from dirt
Connects to the differential with one screw pin
Works on the front or back, right or left of vehicle

INCLUDES:
#5458X Yoke, TRAC9798
#5145 Screw Pin, TRAC5145
#5450 Halfshaft, TRAC7450
#5452 U Joint, TRAC7452
#5459 Rubber Boot, TRAC7459
Direction sheet

NEEDS:
Installing on chassis

This product compliments the main item here.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color
.8 Module pitch

INCLUDES:
One 54T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto vehicle

Several others have actually purchased this product in addition to the product that you are currently checking out.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Steel Building and construction
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

NEEDS:
Assembly onto Vehicle

SPECIFICATIONS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Within the Wheel Hubs, the Truck Needs
Four Total of these Bearings.

The below product likewise pairs really well with the product being gone over.

Half Shaft Set Left Or Right Revo

This is a replacement Half Shaft Set for the Traxxas Revo Truck.
This package includes a part of the telescoping drive shafts.

FEATURES:
Black plastic building
Blue rubber shaft boots

INCLUDES:
Two half shaft assemblies

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 120mm (4.7")

Often purchased with the product that you are currently checking out.

Bbs Blue Rubber Sealed 6 X 13M

This is a set of Traxxas 6x13x5mm Ball Bearings
for usage on the E-Revo

FUNCTIONS:
Stainless Steel bearing building
Blue rubber dirt shields

INCLUDES:
(2) 6x13x5mm ball bearings Part #5180

SPECIFICATIONS:
Inside size: 6mm (0.24")
Outdoors size: 13mm (0.51")
Width: 5mm (0.20")

Get this product to enhance the one you read around.

Axle Carriers Left & Right (1 Ea) Revo

This is the set of Axle Carriers and Steering Blocks for the Traxxas Revo.
The axle carriers and guiding blocks support the stub axles and bolt
    to the upper and lower suspension arms at each wheel.

FEATURES:
Changes broken axle carriers and guiding blocks.
Constructed of black plastic.

INCLUDES:
One set of axle carriers and guiding blocks for the Traxxas Revo.

REQUIRES:
Bolting to each suspension arm, setting up 2 12x18mm ball
    bearings, stub axles, and pillow balls.

Here is a excellent product that several others have actually bought at the very same time.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
usage on the Traxxas Revo series.

FEATURES:
Nylon Building and construction
Black in Color
Allows for Oversized Bearing utilize

INCLUDES:
One Left Axle Provider
One Right Axle Provider
Four Dust Boot Retainers
Two Bearing Spacers

NEEDS:
Setup

Often purchased with the product that you are currently checking out.

E-Revo Body Prographix

    This is a PROGRAPHIX Body for the Traxxas E-Revo
Covers and Protects the Vehicle.

FEATURES:
Lexan building
Pre-painted graphics
Body install holes pre-drilled
Pre-cut
Protective film covers outside of body after surface and is removed
    after completion of paint task

INCLUDES:
One painted graphics E-Revo Body
One decal set

NEEDS:
Lexan safe spray or brush-on paint
Traxxas E-Revo

SPECIFICATIONS:
Length: 500mm (19.7")
Width: 185mm (7.28")
Height: 125mm (4.92")

COMMENT:
Graphics are pre-painted. Needs paint and final
decal application.