Traxxas Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for usage on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon building and construction
Black in color
Fits left or right

CONSISTS OF:
One Totally Put together Driveshaft Assembly

REQUIRES:
Installation on the vehicle

This product compliments the above reviewed product.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Installation on the vehicle

This product compliments the above reviewed product.

Half Shafts, Left Or Right (1/

These are the Left or Right Half Shafts for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Two Internal Splined Half Shafts
Two External Splined Half Shafts
4 Metal U-Joints

REQUIRES:
Installation on the vehicle

This product is regularly bought with the above discussed product.

Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for usage on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Battery Compartment Door
Two Vents

REQUIRES:
Installation on the vehicle

Often bought with the product that you are currently reading about.

Pivot Balls (4)/ Pivot Ball Ca

These are the Pivot Balls and Pivot Ball Caps for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel built pivot balls
Black nylon pivot ball caps

CONSISTS OF:
4 Pivot Balls
4 Pivot Ball Caps

REQUIRES:
Installation on the vehicle's suspension

Often bought with the product that you are currently reading about.

Wheel Hubs, Hex (4)/ Axle Pins

    These are the Wheel Hubs and Axle Pins for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
4 Wheel Hubs
4 1.5x8mm Axle Pins

REQUIRES:
Installation on the vehicle

SPECS:
Hex Size: 12mm

This product is regularly bought with the above discussed product.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Installation on the vehicle

SPECS:
Outer Diameter: 12mm (0.47")
Inner Diameter: 8mm (0.31")
Width: 3.5mm (0.14")

Below is a terrific product that numerous others have bought at the same time.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Red in color

CONSISTS OF:
4 Front/Rear Toe Hyperlinks
Eight Hollow Balls

REQUIRES:
Installation on the vehicle

SPECS:
Length: 86mm (3.4")
Diameter: 5mm (0.20")

Want one more terrific product to match the above discussed product?

Rocker Arm Set, Progressive-2/

This is the Progressive-2 Rocker Arm Post Set for usage on the
Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
Two Rear Rocker Arm Posts
Two Front Rocker Arm Posts
Eight Nylon Bearings

REQUIRES:
Installation on the vehicle

Want one more terrific product to match the above discussed product?

Gear Set (For 2080 Micro Water

This is the Servo Gear Set for usage on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon building and construction
Grey in color

CONSISTS OF:
One Output Gear
One Leading Decrease Gear
One Center Decrease Gear
One Bottom Decrease Gear
Guideline sheet

REQUIRES:
Installation on the servo