Traxxas Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for use on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon building and construction
Black in color
Fits left or right

CONSISTS OF:
One Completely Assembled Driveshaft Assembly

REQUIRES:
Setup on the automobile

This thing praises the above gone over thing.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

CONSISTS OF:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Setup on the automobile

This thing praises the above gone over thing.

Half Shafts, Left Or Right (1/

These are the Left or Right Half Shafts for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Two Internal Splined Half Shafts
Two External Splined Half Shafts
Four Metal U-Joints

REQUIRES:
Setup on the automobile

This thing is regularly bought with the above mentioned thing.

Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for use on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Battery Compartment Door
Two Vents

REQUIRES:
Setup on the automobile

Often bought with the thing that you are presently checking out.

Pivot Balls (4)/ Pivot Ball Ca

These are the Pivot Balls and Pivot Ball Caps for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel constructed pivot balls
Black nylon pivot ball caps

CONSISTS OF:
Four Pivot Balls
Four Pivot Ball Caps

REQUIRES:
Setup on the automobile's suspension

Often bought with the thing that you are presently checking out.

Wheel Hubs, Hex (4)/ Axle Pins

    These are the Wheel Centers and Axle Pins for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Four Wheel Centers
Four 1.5x8mm Axle Pins

REQUIRES:
Setup on the automobile

SPECS:
Hex Size: 12mm

This thing is regularly bought with the above mentioned thing.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
Two Ball Bearings

REQUIRES:
Setup on the automobile

SPECS:
Outer Size: 12mm (0.47")
Inner Size: 8mm (0.31")
Width: 3.5mm (0.14")

Here is a excellent thing that numerous others have bought at the same time.

Toe Link, Front & Rear (Molded

These are the Front and Rear Toe Hyperlinks for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Red in color

CONSISTS OF:
Four Front/Rear Toe Hyperlinks
8 Hollow Balls

REQUIRES:
Setup on the automobile

SPECS:
Length: 86mm (3.4")
Size: 5mm (0.20")

Want an additional excellent thing to match the above mentioned thing?

Rocker Arm Set, Progressive-2/

This is the Progressive-2 Rocker Arm Post Set for use on the
Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
Two Back Rocker Arm Posts
Two Front Rocker Arm Posts
8 Nylon Bearings

REQUIRES:
Setup on the automobile

Want an additional excellent thing to match the above mentioned thing?

Gear Set (For 2080 Micro Water

This is the Servo Gear Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon building and construction
Grey in color

CONSISTS OF:
One Output Gear
One Leading Decrease Gear
One Center Decrease Gear
One Bottom Decrease Gear
Direction sheet

REQUIRES:
Setup on the servo