Traxxas Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

CONSISTS OF:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on car

The listed below thing additionally pairs truly well with the thing being reviewed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

This is a fantastic enhancement to the thing currently being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Many others have acquired this thing together with the thing that you are currently reading about.

Slipper Clutch Complete Stampede 4X4

This is the Complete Slipper Clutch Set for the Slash 4X4 from Traxxas.

FEATURES:
Complete slipper clutch assembly
Pre-assembled

CONSISTS OF:
2 nuts
1 spring
1 metal plate
1 pin
3 pads
2 washers
54T spur gear

NEEDS:
Setup in car

Here is a great thing that lots of others have bought at the very same time.

Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic construction
Black in color

CONSISTS OF:
Two steering blocks

NEEDS:
Setup on guiding assembly

SPECIFICATIONS:
Length: 35mm (1.38")
Width: 32mm (1.26")

You will love this product if you have the product above mentioned.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise offered in Blue (RPMC0705)

This thing is regularly acquired with the above stated thing.

Body Mount (1)/Body Mount Pos

This is the Front/Rear Body Mount for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic construction
Black in color

CONSISTS OF:
One body mount
Two body mount posts

NEEDS:
Setup on chassis

SPECIFICATIONS:
Length: 126mm (4.96")
Width: 24mm (0.95")

Often acquired with the thing that you are currently reading about.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic construction
Black in color

CONSISTS OF:
One left caster block
One right caster block

NEEDS:
Setup on Slash

SPECIFICATIONS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

This is a fantastic enhancement to the thing currently being reviewed.

54T 0.8 P Spur Gear

This is the 54 Tooth Spur Equipment
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon construction
Black in color
.8 Module pitch

CONSISTS OF:
One 54T 0.8 Pitch Spur Equipment

NEEDS:
Assembly onto car

Often acquired with the thing that you are currently reading about.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

CONSISTS OF:
Two Ball Bearings

NEEDS:
Assembly to car

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are used to support the Main Clutch (one required).