Traxxas Door, Battery Compartment (1)/

This is the Battery Compartment Door and Vents for usage on
the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Battery Compartment Door
Two Vents

REQUIRES:
Setup on the car

Here is one more product that praises the product being reviewed.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Setup on the car

This product is frequently purchased with the above mentioned product.

Driveshaft Assembly (1) Left

This is the Driveshaft Assembly for usage on the
Traxxas 1/16 E-Revo VXL.

FEATURES:
Nylon building and construction
Black in color
Fits left or ideal

CONSISTS OF:
One Completely Put together Driveshaft Assembly

REQUIRES:
Setup on the car

The listed below product also sets actually well with the product being reviewed.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
One Chassis

REQUIRES:
Setup on car

SPECS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

You will like this thing if you have the thing previously stated.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Setup over front diff assembly

You will like this thing if you have the thing previously stated.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite building and construction
Red in color

CONSISTS OF:
4 Pushrods
Eight Hollow Balls

REQUIRES:
Setup on the car

SPECS:
Length: 70mm (2.8")
Diameter: 5mm (0.20")

Frequently purchased with the product that you are presently reading about.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Skidplate
One Back Skidplate
One Transmission Skid Plate
Two Guiding Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Setup on the car

Frequently purchased with the product that you are presently reading about.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction, black in color

CONSISTS OF:
One Wing
One Decal Set

REQUIRES:
Setup on the car

SPECS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")