Traxxas Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for usage with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This item is regularly bought with the above mentioned item.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FEATURES:
Steel building and construction

CONSISTS OF:
2 Output Gears
2 Spider Equipments
Spider Gear Shaft and Diff Carrier Support
Guideline Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Often bought with the item that you are currently reviewing.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECS:
Inside size: 6mm
Outdoors size: 12mm
Width: 4mm

COMMENTS:
This bearing set is used in the transmission and differentials of
    the Revo.

The below item additionally pairs really well with the item being reviewed.

Carrier, Differential (Heavy D

This is the Strong Carrier Differential for usage on the
Traxxas Summit Truck RTR

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Strong Differential Carrier
One Front and Rear Linkage Arm
One Differential Fork
2 X-Ring Gaskets
One Ring Equipment Gasket
2 Bushings
One 6.5x10x0.5mm Washer

REQUIRES:
Installation on the automobile

Several others have actually bought this item in addition to the item that you are currently reviewing.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

CONSISTS OF:
2 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Vehicle

SPECS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

Get this item to improve the one you are reading around.

Gear, Locking Differential Out

This is the Locking Differential Ouput Equipment for usage on the
Traxxas Summit Truck RTR

FEATURES:
Steel building and construction

CONSISTS OF:
One Locking Differential Output Equipment
One Differential Slider
One 3x12mm Screwpin

REQUIRES:
Installation on the automobile

This item is regularly bought with the above mentioned item.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Carrier
2 Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

REQUIRES:
Assembly to automobile

Several others have actually bought this item in addition to the item that you are currently reviewing.

Diff Housing Frnt & Rr Revo

This is the Front and Rear Differential Housing
for the REVO from Traxxas.

FEATURES:
Resilient black nylon building and construction

CONSISTS OF:
One diff housing (2 pieces)

REQUIRES:
TRAC5119 10x15mm Bearing (1)
    TRAC5118 8x16mm Bearing (1)
    TRAC5117 6x12mm Bearings (2)
    TRAC5381 Diff Carrier & Gasket
    TRAC3965 Cap Head Screw 2.5X8MM
    TRAC2587 Cap Head Screw 3X10MM
    TRAC5329 Rear bulkhead
    TRAC5330 Typeface bulkhead

You will certainly love this product if you have the product earlier mentioned.

Carrier, Differential Heavy Du

This is the Carrier Differential for the Traxxas Revo and E-Maxx.

FEATURES:
Changes worn diff providers gaskets and spacers

CONSISTS OF:
Diff Carrier and Gaskets, TRAC5381
Steel Spider Equipment Braces (not used with Revo)
Guideline sheet

REQUIRES:
Disassembly of differential, setting up new parts and refilling with
    modeler's choice of diff lube
10K (TRAC5135) 50K (TRAC5137)
30K (TRAC5136) stock weight Total set (TRAC9136)