Traxxas Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for usage with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring equipment
One pinion equipment

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This item is often acquired with the above stated item.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FEATURES:
Steel construction

CONSISTS OF:
2 Output Gears
2 Spider Equipments
Spider Gear Shaft and Diff Carrier Assistance
Guideline Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Often acquired with the item that you are currently checking out.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel construction
Blue rubber dirt shields

CONSISTS OF:
(2) ball bearings, Part #5117

SPECS:
Inside size: 6mm
Outside size: 12mm
Width: 4mm

REMARKS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

The listed below item also pairs truly well with the item being gone over.

Carrier, Differential (Heavy D

This is the Strong Carrier Differential for usage on the
Traxxas Summit Truck RTR

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Strong Differential Carrier
One Front and Rear Linkage Arm
One Differential Fork
2 X-Ring Gaskets
One Ring Equipment Gasket
2 Bushings
One 6.5x10x0.5mm Washer

REQUIRES:
Installation on the car

Numerous others have acquired this item along with the item that you are currently checking out.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Construction
Blue Rubber Sealed

CONSISTS OF:
2 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Car

SPECS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Density: 5mm (0.19")

Get this item to improve the one you read about.

Gear, Locking Differential Out

This is the Locking Differential Ouput Equipment for usage on the
Traxxas Summit Truck RTR

FEATURES:
Steel construction

CONSISTS OF:
One Locking Differential Output Equipment
One Differential Slider
One 3x12mm Screwpin

REQUIRES:
Installation on the car

This item is often acquired with the above stated item.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Carrier
2 Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

REQUIRES:
Assembly to car

Numerous others have acquired this item along with the item that you are currently checking out.

Diff Housing Frnt & Rr Revo

This is the Front and Rear Differential Housing
for the REVO from Traxxas.

FEATURES:
Durable black nylon construction

CONSISTS OF:
One diff housing (2 pieces)

REQUIRES:
TRAC5119 10x15mm Bearing (1)
    TRAC5118 8x16mm Bearing (1)
    TRAC5117 6x12mm Bearings (2)
    TRAC5381 Diff Carrier & Gasket
    TRAC3965 Cap Head Screw 2.5X8MM
    TRAC2587 Cap Head Screw 3X10MM
    TRAC5329 Rear bulkhead
    TRAC5330 Font style bulkhead

You will like this item if you have the item just above mentioned.

Carrier, Differential Heavy Du

This is the Carrier Differential for the Traxxas Revo and E-Maxx.

FEATURES:
Changes used diff providers gaskets and spacers

CONSISTS OF:
Diff Carrier and Gaskets, TRAC5381
Steel Spider Equipment Braces (not utilized with Revo)
Guideline sheet

REQUIRES:
Disassembly of differential, setting up brand-new parts and filling up with
    modeler's choice of diff lube
10K (TRAC5135) 50K (TRAC5137)
30K (TRAC5136) stock weight Total set (TRAC9136)