Traxxas Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Equipment and Pinion
for use with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

CONSISTS OF:
One differential ring gear
One pinion gear

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This product is often gotten with the above discussed product.

Gear Set, Differential

This is the Differential Equipment Set for the Traxxas Revo and E-Maxx.

FEATURES:
Steel building

CONSISTS OF:
2 Output Equipments
2 Spider Equipments
Spider Gear Shaft and Diff Carrier Assistance
Direction Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Regularly gotten with the product that you are currently reviewing.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt guards

CONSISTS OF:
(2) ball bearings, Part #5117

SPECS:
Inside size: 6mm
Outdoors size: 12mm
Width: 4mm

COMMENTS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

The listed below product additionally pairs actually well with the product being reviewed.

Carrier, Differential (Heavy D

This is the Strong Carrier Differential for use on the
Traxxas Top Truck RTR

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Strong Differential Carrier
One Front and Rear Linkage Arm
One Differential Fork
2 X-Ring Gaskets
One Ring Equipment Gasket
2 Bushings
One 6.5x10x0.5mm Washer

REQUIRES:
Installation on the automobile

Several others have actually gotten this product together with the product that you are currently reviewing.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless Building
Blue Rubber Sealed

CONSISTS OF:
2 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Automobile

SPECS:
Inner Size: 8mm (0.31")
Outer Size: 16mm (0.62")
Thickness: 5mm (0.19")

Get this product to enhance the one you are reading about.

Gear, Locking Differential Out

This is the Locking Differential Ouput Equipment for use on the
Traxxas Top Truck RTR

FEATURES:
Steel building

CONSISTS OF:
One Locking Differential Output Equipment
One Differential Slider
One 3x12mm Screwpin

REQUIRES:
Installation on the automobile

This product is often gotten with the above discussed product.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

CONSISTS OF:
One Diff Carrier
2 Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

REQUIRES:
Assembly to automobile

Several others have actually gotten this product together with the product that you are currently reviewing.

Diff Housing Frnt & Rr Revo

This is the Front and Rear Differential Housing
for the REVO from Traxxas.

FEATURES:
Durable black nylon building

CONSISTS OF:
One diff housing (2 pieces)

REQUIRES:
TRAC5119 10x15mm Bearing (1)
    TRAC5118 8x16mm Bearing (1)
    TRAC5117 6x12mm Bearings (2)
    TRAC5381 Diff Carrier & Gasket
    TRAC3965 Cap Head Screw 2.5X8MM
    TRAC2587 Cap Head Screw 3X10MM
    TRAC5329 Rear bulkhead
    TRAC5330 Typeface bulkhead

You will certainly like this product if you have the product previously stated.

Carrier, Differential Heavy Du

This is the Carrier Differential for the Traxxas Revo and E-Maxx.

FEATURES:
Replaces used diff carriers gaskets and spacers

CONSISTS OF:
Diff Carrier and Gaskets, TRAC5381
Steel Spider Equipment Braces (not utilized with Revo)
Direction sheet

REQUIRES:
Disassembly of differential, setting up brand-new parts and refilling with
    modeler's option of diff lube
10K (TRAC5135) 50K (TRAC5137)
30K (TRAC5136) stock weight Total set (TRAC9136)