Traxxas Diff Oil 100K Weight

This is 100K Weight Differential Oil for the Traxxas Revo
but can be utilized in other automobiles as well.

FEATURES:
100K weight oil

CONSISTS OF:
0.7oz (20cc) bottle of oil w/ 1-1/2" pointed fill cap

This thing praises the above talked about thing.

Sealed Aluminum Differential Case For Traxxas 2Wd Electric

This is the optional Hot-Racing Aluminum Differential Case
for the Traxxas Bandit, Rustler, 2WD Stampede, 2WD Slash
and Monster Jam Cars

FUNCTIONS:
CNC aluminum building and construction diff case, black in color
Hardened steel gear
Sealed differentials enables tuning to track conditions by changing
    weight of diff oil
Four O-rings help seal against fluid leakage
Thirty day limited service warranty starting at date of purchase- valid
    in the United States only

CONSISTS OF:
Sealed Differential Case
Four O-Rings
Two Screws

SPECIFICATIONS:
Outdoors Size: 1.48" (37.5mm)
Shaft Size: .200" (5.10mm)
General Density: 0834" (21.2mm)

Here is another thing that praises the thing being talked about.

Planet Gears & Shafts

These are the replacement planetary gear and shafts for the Rad 2 and Hawk 2.

FUNCTIONS:
All these gears and shafts are made of metal(most likely with a low
amount of steel).

CONSISTS OF:
4- planetary gears
4- planteary gear shafts
2- sun gears
1- sun gear positioning shaft

WAJ
1/16/94

Often gotten with the thing that you are currently reviewing.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building and construction

CONSISTS OF:
Two Output Gears
Two Spider Gears
Spider Gear Shaft and Diff Provider Assistance
Direction Sheet

NEEDS:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Here is a great thing that lots of others have bought at the exact same time.

Carrier, Differential (Heavy D

This is the Strong Provider Differential for usage on the
Traxxas Summit Truck RTR

FUNCTIONS:
Nylon building and construction
Black in color

CONSISTS OF:
One Strong Differential Provider
One Front and Rear Linkage Arm
One Differential Fork
Two X-Ring Gaskets
One Ring Gear Gasket
Two Bushings
One 6.5x10x0.5mm Washer

NEEDS:
Setup on the automobile

The listed below thing additionally pairs truly well with the thing being talked about.

50K Diff Oil

This is 50K wt Differential Oil for the Traxxas Revo
but can be utilized in other automobiles too

FUNCTIONS:
50K weight oil

CONSISTS OF:
1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

Here is a great thing that lots of others have bought at the exact same time.



These are the Wheel Hex Clips for the
    Associated Factory Group RC8T Truggy Kit.

FEATURES:
Metal building and construction
Black in color

CONSISTS OF:
Four Wheel hex Clips

NEEDS:
Setup on the automobile

SPECIFICATIONS:
Inner Size: 17mm (0.67")
Outer Size: 19mm (0.75")
Width: 3mm (0.12")

You will certainly love this item if you have the item earlier discussed.

5000Mah 11.1V 3S 25C Ml Lipo

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.

FEATURES:
Semi stiff building and construction does not require a difficult case and removes
    wire harness connectors that can loosen and fail
Engineered specifically to fit Traxxas models
New high current port with gold-plated copper terminals and
    incorporated balance port
iD Auto Battery Recognition enables Traxxas iD equipped battery chargers to
    instantly set and enhance charge settings for specific battery
MAXX cable television high-efficiency 12 gauge silicone jacketed wire

CONSISTS OF:
Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High
    Current Connector and Integrated Balance Plug

NEEDS:
LiPo compatible charger such as the Traxxas EZ-Peak Plus, TRAP2970
LiPo charging bag

SPECIFICATIONS:
Setup: 3S1P
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)
Weight: 13.3oz (376g)

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER EVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER take apart or modify pack circuitry in any way or leak cells
NEVER put on combustible materials or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids