Traxxas Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Carrier/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Carrier
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

SUCHES AS:
One Diff Carrier
2 Blue Rubber Shaft Gaskets
One Black Rubber Diff Carrier Gaskets
One Gray Washer

NEEDS:
Assembly to vehicle

This product is regularly bought with the above mentioned product.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FEATURES:
Steel building and construction

SUCHES AS:
2 Output Gears
2 Spider Gears
Spider Gear Shaft and Diff Carrier Assistance
Direction Sheet

NEEDS:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

Regularly bought with the product that you are presently checking out.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for use with the Traxxas Revo 3.3.

FEATURES:
Direct replacement part

SUCHES AS:
One differential ring gear
One pinion gear

NEEDS:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

Regularly bought with the product that you are presently checking out.



This is a CVD Coupling Rebuild Set used for various Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FEATURES:
Black oxide rust preventive surface on the coupling

SUCHES AS:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm size x 9mm length
(2) Set screw 4.0 x 3mm

You will certainly like this product if you have the product just above stated.

Gear Set, Differential (Output Gears, Spider Gears/ Shaft)

This is the Differential Gear Set for the Traxxas X-01 Car, TRAD42**.

FEATURES:
Solidified steel building and construction

SUCHES AS:
2 Output Gears
2 Spider Gears
One Spider Gear Shaft
One Carrier Assistance

Lots of others have actually bought this product together with the product that you are presently checking out.

8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Construction
Blue Rubber Sealed

SUCHES AS:
2 8mm x 16mm Rubber Sealed Bearings

NEEDS:
Assembly onto Automobile

SPECS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Density: 5mm (0.19")

This is a wonderful enhancement to the product presently being reviewed.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

SUCHES AS:
2 Ball Bearings

NEEDS:
Assembly to vehicle

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Main Clutch (one needed).

Lots of others have actually bought this product together with the product that you are presently checking out.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Construction
Blue Rubber Sealed

SUCHES AS:
2 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

NEEDS:
Assembly onto Automobile

SPECS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Centers, the Truck Needs
Four Total of these Bearings.

Regularly bought with the product that you are presently checking out.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Construction
Blue and Black in Color

SUCHES AS:
Four Blue Rubber Pivot Ball Boots
Four Black Dust Boot Retainer
Four Blue Notched Dust Boot Retainer
Four Blue Rubber Boot Plugs
Four nylon Pivot Ball Retainers
Direction sheet

NEEDS:
2 bundles had to finish truck